Broken RJ45 Connector Solution (5 pcs in Black/Silver/Blue/Yellow/Clear colors)

Does the job and simpler than replacing the fitting

I'm impressed that these little plastic connectors make the satisfying click and pretty secure connection after the plastic lugs snapped off my existing cable. I have 15m cables so buying these clips was cheaper than a replacement cable. However, the clip has to sit over a moulded rubber part of the cable connector which previously housed the small plastic lug (the one that snapped). This was true for multiple cables that I have. To fit these clips on, I had to spend time sawing off the moulded rubber, which wasn't that easy. After I did that though these worked like a charm. A small and cheap solution to a specific problem.

This was a "godsend" for repairing the broken retaining clip on my RJ45 connector. I had hardwired my house to reduce EMF radiation, and having to re-run this cable would have been time-consuming and stressful. Thank you.

Will admit that I didn't like the price. But I do have damaged plugs on a couple of network cables that, over the years, have become trapped behind the decor & complete renewal was impractical. Pest was that the damaged plugs didn't always stay in the related sockets, even with elastic bands etc. So, these little replacement clips do certainly do the trick and properly keep the plugs engaged, and I can't argue with that. To be fair then, I can't mark them down! For your info, they do appear to be 3D printed, so I guess that somewhere on the internet there is an .stl file for the practical to utilise.

it didnt solve the problem at all after about a month of using it didnt make a difference. not to mention the heat coming off the pc makes the plastic more malleable and makes it even less reliable. i thought they made it out of decent plastic due to the reviews but its not. just buy a new cable.

I had to make a small adjustment to the original plug, but the need was obvious. The repair fitted straight on and now the plug is a good solid-fit once more. Dead easy to use, great result for the cable.

I had two Ethernet candle with broken clips that were routed under floors so not feasible to replace. Both had mouldings that needed trimming but once I did that these fitted perfectly and hold the cables securely. No more connections dropping out!

I bought these RJCLIPs because a the tab had broken off a custom cable, which would have cost me £32 to replace. The clip fitted perfectly onto my RJ45 connector, and then I gave it a very rigorous test to see if it maintained contact, and it passed with flying colours

My category 6a ethernet cables are thick and expensive. The latch/tap on my RJ45 connector broke, and there is no way I will throw away my Cat6a cable. So, I purchased the RJ45 Connector Solution. These clips work. If your Cat6a cable has a boot on the RJ45 connector, you will need to slide down the boot to get it out the way. Once you attach the RJ45 Connector Solution repair clip to the RJ45 connector, you will not be able to use the boot anymore. Might as well cut off the boot. See attached photos.

Parfait pour pour faire face à la casse recurente de la languette du câble rj45.

I had a Cat 5 cable with the dreaded broken clip and the RJCLIP worked like a charm to fix it. Rerunning the cable wan't an option and preferred not to crimp on a new end so this product was the answer. Works like new. One note is that the RJCLIP does not fir over the existing sleeve and I couldn't slide it back to reveal the cable end so I used some snips to remove the sleeve and the RJCLIP fir perfectly and snapped right into my connection point as advertised. This really is an affordable and clever solution to those loose or broken clips.

A lifesaver!! One of these little clips saved me from needing a new Ethernet cable for the love of a broken little clip! Super easy to clip right on and it works like a charm. I love that it’s made in Canada too. You don’t see that too much anymore. I hope you make these in more colors and I’ll have using them just for fun on my cables!

Been using them for about a month and they absolutely work. I had a few issues getting it to stay in the socket at first. But when i finally got it in and got it to stay in I have had zero problems! I am playing World of Warcraft with out having the cable fallout. I highly recommend this! I have uaeed just the ne but the other 4 are being kept safe just in case.