DEX FIT Nitrile Work Gloves FN330, 1 Pair, 3D-Comfort Stretchy Fit, Firm Grip, Thin & Lightweight, Touch-Screen Compatible, Durable, Breathable & Cool, Machine Washable; Grey M (8)

The fabric of the gloves is thick and very comfortable, the coating is also thick and very durable. Once they warm up to your body heat they have great dexterity.The touch screen functions work as advertised however to get them to work properly you may have to scuff or use the gloves a little bit. Basically when they're brand new or fresh out of the washer they're very smooth and the Touchscreen function doesn't work well but once you've scuffed them up they work very well with a touch screen.I have two gripes with these gloves, the first is the same of all gloves with this type, the wrist portion is about one or two inches too short. They don't offer much wrist protection in sizes large and above. Basically it seems like they put almost exactly the same proportion of elastic on all of them regardless of size, and while it may offer excellent wrist protection and keep the gloves tight on the smaller gloves it doesn't do anything on the larger sizes, leaves a large portion of my wrist exposed and constantly rides up requiring me to pull the gloves back on frequently.Which brings me to my second gripe, the stitching at the base of the glove where you put your hand in is weak and rips when you pull on it constantly to tighten the glove. This is the white stitching on the very rim of the glove on the extra large.So basically these gloves are pretty much perfect for the advertised functions, they have some of the best material I've yet seen in any glove of this type and look to have excellent durability over the last brand I bought "VGO" (too thin, wears out inside week). But like all gloves of this type the wrist is too short in the larger sizes. Considering I have yet to find a glove of this type that has a proper length wrist, I can't really say anything bad about these.

I originally bought these to protect my hands and give me some extra grip during a move, they were so comfortable and helpful I didn't take them off when I started driving the truck. When I did finally take them off, I realized the steering wheel was a LOT more slippery so I put them back on and they were my driving gloves for the rest of the trip.Pros: Tight, but very comfortable fit. Super grippy! Thin enough to not have to take off in order to reach for something in your pockets, but thick enough to provide a nice layer of protection for your hands. The ability to use your touchscreen phone with them on. Breathable-my hands never got sweaty with them on. Machine washable.Cons: NONE. I love these things so much I was sad I had to stop wearing them!

Short version:Medium had a snug fit but slightly short fingers whereas the large had fingers of the right length but loose in the palm and fingers (medium fit with the longer fingers would have been perfect for me). Touchscreen compatibility is really bad with my phone with a glass screen protector. Durability is fine for light-duty use. Not bad for the price, but I will continue exploring other options.Long version:I have purchased the FN320 in medium and the FN330 in large. I wanted to see if the FN330 was better for touchscreens as advertised and also how the large fits compared to the medium.Overall, I cannot tell a difference in touch screen compatibility between the two. On my phone with a glass screen protector, touches are not sensed the majority of the time unless I am absolutely smashing my finger into the screen. I didn't really care much about this feature for either the FN320 or FN330, but considering they advertise the FN330 as being touchscreen compatible, I think that is a bit misleading. They are only marginally better than the FN320 for touchscreens but still bad.In terms of sizing, I found the FN320 in medium has a nice tight fit around the palm and fingers for me, but the fingers are just slightly too short (perhaps by 1/4" or 6mm). The tight fit helps with dexterity and also helps keep the glove from sliding around on my hand during use. The FN330 in large has the right length for the fingers, but the tightness around the palm and fingers is much looser. That ends up hurting dexterity a lot more than I expected and the glove slides around a lot more during use. If there was an option that had the longer fingers of the large with the tighter fit of the medium, that would be a perfect fit for me.In terms of durability, they are fine for light duty use. I have used these gloves on and off for a multitude of things ranging from automotive work, moving boxes and equipment, working on electronics and other small items for repair, and light thermal protection for removing 3D prints from a hot printer bed. In a few months time, some of the nitrile has started to tear between the fingers at the finger webbing and the cuffs have started to fray. They have taken a hand wash and a machine wash just fine. Overall, I don't think these are well suited to medium or heavy duty use; the fabric is not very thick or cut resistant and the nitrile is fairly thin which I believe would wear off quickly in medium or heavy duty applications.Overall, I think these gloves are good, but not great. The cost for 3 pairs also seems high compared to other dexterity-focused nitrile gloves out there on the market. Some brands offer better value in terms of the pairs you get for the price. There are also the very cheap options that can be found at many local stores which while not high-quality, do work in the short-term. Considering that neither the medium or the large of the FN320 or FN330 gloves fit my hands quite right, I will continue exploring other options out there.

I wasn't sure which size glove to choose: small or medium but I had tried large at work and that definitely was too big. The medium fit just right, nice and snug. I'm able to pick up and carry flattened cardboard without any slipping through its grip. Yet the fingertips work well with my cells touchscreen.

Nice tight comfortable gloves can work your phone through them and made of good quality materials, I’m an electrician and use them everyday and they are holding up.

If you’re looking for work gloves that do EVERYTHING right, these are the ones to buy. I work in a warehouse where I load product onto pallets all day, and these:-Fit perfectly, with no sliding, rubbing or bunching-Have built-in stretch for outstanding comfort-Stay cool, and keep my hands from sweating-Provide powerful grip enhancement with their rubberized palm and fingers-Are washable (!!!) in the laundry-Are touch-screen compatibleTL;DR These are perfect work gloves that do everything right. Pick the right size and never look back.

Exactly what i was looking for and more !

Solid gloves, provide A TON of extra grip, great for unloading the truck.Only issue is they were a little tight and i had to really struggle to get them on, although once I got them on and off a few times they loosened up and slid on and off my hands easily.

great fitting 3d made, fits for small hands

Guanti ottimi per eseguire lavori manuali e per chi, come me, lavora molto con il cartone e d'inverno questo crea molti disagi sulle mani, quali spaccature sulla pelle, graffi e mani secche.Funzionano su schermi touch purché non ci siano protezioni troppo spesse sullo schermo.Soddisfatto

Super contente de ces gants. Après quelques jours d'utilisation, je les recommande fortement ! Côté sécurité, grâce aux gants, j'ai évité une grosse brûlure, car j'ai attrapé mon tube de cuivre où je venais de chauffer avec chalumeau, j'imaginais si je n'avais pas mes gants ! Et le gant n'est pas abime. Côté tactile ， j'avoue quand j'ai essayé à la réception, c'était dur, mais là, je tape le commentaire avec mes gants. Donc sans hésitation, j'en reprendrai plus tard.