Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks

Bought these for my stepkid old beat up board as well as new deck and wheels but the trucks were still great but bushings looked a little suspect. These were simple to install and fit perfect. They may be a little on the softer side but he's 9 so his weight isn't going to affect the it either way but as a grown dude 185lb you could tighten them pretty tight and they'd still be pretty easy to flex on a turn.

I just needed the pivots, and some friends used the bushings, they are nice they said, the pivots are made from nice quality too.

Not the best fit for Venture Hi trucks, but serviceable for a cruiser setup. Compared to stock venture bushings, the barrel is about 1-1,5mm longer. Because of this, the kingpin nut does not screw down far enough to hit the poly retainer, so it would quickly come loose on a trick setup. They are however soft enough that you could potentially use a mandoline to shave them down and not damage or dull it. They actually feel softer than 88a, stock Indy 90a bushings feel about 5-7a harder than these. I can easily squish/deform these between a finger and a thumb. Really only meant for riders 110lbs and under. I’m 109lbs and with the kingpin nut screwed down as much as it will go before damaging the bushings, they feel really loose but not undesirably so given they’re on a carve-y cruiser. They seem well poured, somewhat self lubricating, and durable enough, most complaining about the durability with picture reviews have their trucks tightened way too much, and are damaging the bushings. This is stupidly common in amazon reviews of any soft bushings. If you’re tightening them that much to get the feel you want, you need to select harder bushings. The bushing should never bulge or deform outward beyond/into the washer. I recommend everybody looks up recommended weight charts for bushing hardnesses before badmouthing good products. Pivot cups are well made, squeak free, but there is no universal pivot cup size, so you cannot expect a perfect fit. All in, fantastic value for the money.

hard bushings for heavier people

Excelente producto!

Everything I needed to revive my 30 year old skateboard setup. I didn't know if Independent freestyle trucks needed a different size, but these fit perfectly, so I guess the answer is they use the same as a 149/159.

I know they recommend harder bushings for my weight, but I've used other soft bushing from other brands on the same setup, around 88a, and had no problems. I switched from 91a yellow bones bushings that were worn out. I installed these and they disintegrated immediately. I couldn't get them to work tight or loose, I had to tighten them so tight to not get wheel bite I couldn't turn, and I like to ride pretty loose. They also had wheel bite when loose. I ride 55mm OJ hot juice with Indy's and risers. They're on a 8.5 deck and just wouldn't cut it. Maybe I'll try the harder ones, but I went with independent bushings instead.

So I bought 2 sets of these bushings and swapped out the old stock bushings for these on each of my setups and I gotta say, I am super pleased with not only the result, but my set up rides and turns much smoother than it did before. Not only that, I like to ride my trucks somewhere in the middle of the loose/tightness spectrum. But these bushings do the job riding loose and no wheelbite whatsoever. Not to mention the black and purple scheme here. It looks sick. I absolutely recommend these bushings, and they're good for the price.

Pretty great. Good quite, and the 88a bushings have amazing rebound.Love that it came with pivot cups too.

Shipping was quick, product was as described, fitment was great! Would definitely order more from these guys!!

Get the appropriate stiffness and they’ll work fine.. No complaints