CDI 1/2 Inch Drive Adjustable Click Torque Wrench, Range 30-250 Ft Lbs / 47-332 Nm (2503MFRMH)

Very well made in the USA. Love the locking ring and it’s got a nice click. Highly recommend. Been a car guy all my life and finally stepped up and got a nice torque wrench.

CDI is an old and respected manufacturer of torque measurement products. The fact that Snap-On bought them only makes them better in my opinion. This wrench is an accurate and high quality tool - the build quality is obvious to anyone who has a clue about what a quality tool is. This one is a replacement for my previous one that somehow disappeared in my son's toolbox ;-) I reveived the wrench two days early from Amazon's supplier (BW Direct), it was in a solid plastic protective case and the instructions, warranty AND torque test results were all included.I'm writing this review to not only endorse the manufaturer and the tools they make but to give my opinion on the few negative comments I have read on this page. Here they are:1. this review is about a 1/2" drive wrench, NOT a 3/8' drive. A 1/2" drive always makes a nice, solid click. A 3/8" does not - all 3/8" torque wrenches I have ever used make light, subtle clicks. If you don't pay attention, you miss it and inevitably over-torque. If you happen to see this complaint in negative reviews, make sure you are looking at the drive size of the wrench being reviewed.2. the laser markings that indicate the torque setting are crisp, well defined and easy to see. Again, look at the wrench size - markings on 3/8" and 1/4" drives are harder to see simply because they are smaller.3. the knurling of the handle is well machined and provides sufficient grip, even with greasy hands.At this price, this wrench is a steal and I would definitely recommend it to a friend.

Good solid wrench, the added leverage you get from the length makes the job sooooo much easier. I had to torque axle nuts to 217 ft lbs and this tool made it almost enjoyable. Made by the same folks that make snap on.. its not cheap, but I don't think I have to replace it soon.

I did quite a bit of research on torque wrenches and came up with the CDI brand as a very good quality, accurate unit for an excellent price. I then searched for where to buy it for a good price and found the best price on Amazon. I ordered it and received it in a couple of days so I am very pleased.A number of pro's for this product:1. It is a solid, well crafted unit and has a metal handle so will not break readily with the amount of abuse I put them through2. To set the wrench, one rotation is 10. You would not believe how many wrenches go in 15's; you try to figure out (easily) how to get it to 85; not fun.3. It has a nice solid click when you get there!4. It has acurate readings (I verified it on a torque wrench bench tester).Cons:1. Once I got the wrench I noted that it is not as acurate when you get to the high end or very low end of its range. I was not concerned about the high end but I often do work that requires it to be below 50 ft lbs so I ended up getting another CDI torque wrench (3/8 drive) whose main range is 30-75 to fix that. Keep that in mind when buying this; it works most accurately between 50 and 225. (It is still quite acceptable but I'm a perfectionist when it comes to torque)Please note that to keep the wrench acurate you need to reset it back to the setting it came at from the factory (in this case 30). There was a document inside indicating this; that was good to know as I was always told to set it all the way out. Not following this every time your done using it is one quick way to have your wrench measurements go out of whack.Cheers

I love this thing. It comes with a nice protective case. The wrench is heavy and very long so it will be hard to torque things in tight spaces but other than that it is very easy to use. The markings on it are kind of hard to see but still legible in good light. I love how you pull down on the sleeve to twist left or right for your desired torque setting and after you are done, it clicks back into place and locks. While I used it my hands never even came close to hitting the sleeve and knocking my settings off. That was my one concern. No longer is it a concern. The handle is nice and grippy too.You definitely get what you pay for. I have another torque wrench but it is cheap and we had it for about 7 years. It still works but it is not calibrated correctly and plus I never knew to set the torque settings back to the lowest setting when I was finished with it. With this model I have, I make sure to set it to its lowest setting after I am done with it. The switch to set it to ratchet left or right has a center that locks the ratcheting. It also has a button you press to release whatever socket you have on it as well as put one on. All of my other tools I keep outside. This wrench is staying in the house with me so it don't get lost or damaged.If you want a good quality wrench, this is your toy.

Needed this torque wrench for light duty & Medium truck lug bolts as well as motor home wheels. Easy to set this wrench to specific torque. Very darn accurate when compared with my recently calibrated dial indicator torque wrench. Tool is long enough to provide good mechanical advantage at the upper torque range. Highly polished surfaces make it easy to wipe clean before placing back in its black molded plastic case. Fine knurled grip surface is very comfortable on the hands. Well made quality tool.Only Con - is scale is very light against highly polished chrome surface makes it somewhatdifficult to read scale setting (especially in brightsunlight).For the price this is a much better click type torque wrench then most Chinese knock off torque wrenches.Note: do not forget to reduce torque setting back to ~ 30 ft/lbs before storing to remove tension on internal spring.

It's an excellent torque wrench. Have had it for 10+ years!!Holee Smokes!!Never had one issue with it, and I use it on my vehicle on and off for the wheels when I rotate tires.I've performed a number of jobs on my truck and this simply is a great quality tool.It will certainly last a lifetime on normal use.Accuracy - is still perfect 10 years later.Only issue is reading the numbers off the chrome finish, and by today's standards, it may not be the best.I would certainly look for something with a little magnifier on it so that you precisely put it on the number you need or use a digital wrench type.One of the very first products I purchased from Amazon a decade ago.Amazon has been great for this and other items.Excellent.

This is a quality piece of hardware. It makes my Harbor Freight $20 torque wrench look like garbage. Compared to the HF wrench, this one is much more easily rotated to the desired torque level. The HF tool takes tremendous effort, particularly approaching its upper limits. The machine work and chroming are like jewelry. The only complaint I have is that when torqueing the wrench, there is a tendency to push down the release ring and then the handle turns and you're changing torque values. This happens a lot especially when you're at strange angles like working on a vehicle. If I was CDI, I would engineer some type of additional locking mechanism that you would have to snap/unsnap to allow you to pull on the ring. My other high end wrench is a Precision Instruments that uses a dial to adjust the torque - when you are done, a metal latch covers the adjustment knob so you don't accidently change the value.

I would give this 6 stars if I could. I was actually thinking about buying a Snap-On wrench a few months back but the price stopped me. Well, this is certainly comparable to that level of quality but basically half the price. CDI Torque is a Snap-On sub-company anyway. I've used it a few times in the past week and this is waaaaay better quality than the cheaper Princess Auto special torque wrench I had before. Just night and day difference. If you are looking for a very high quality torque wrench at a reasonable price, just buy it. I'm now considering buying the 3/8" and 1/4" versions from CDI.

Accurate and well built. Only nit-pick is the text can be kinda hard to read under the shop lights (metal halide bulbs).

Good Price point for a quality wrench

Made in North America. Fast delivery, good quality. Will last a lifetime.

Good tools