OMT Harmonic Balancer Puller, Steering Wheel Puller Tool Kit

Used it on my Ford 302 Windsor balancer and came off smooth as butter with little effort

It works great .

Months later still working amazing

This is a good tool. I used it to remove stuck brake drums on a golf cart. My only concern is that the threads on the center bolt are not hardened and if too much pressure is applied they will strip.

Worked very well, all parts needed included

Works great! I have a 71 Mercury Cougar with a blow mild horn… The yolk was too thick to pull my wheel. The wheel holes were only 1 3/8” apart center to center. I used a dremmel to bore out the slots a little and it worked great!

I have no other way to say it because it was very possible the cheapest made tool I ever bought. I bought it to remove small flywheels on small engines. The threads on the center bolt were so poorly cut that I had metal in my fingers before I could get it mounted to the first application. I had to order a puller again because it broke on a me.

So far this has done everything I've asked it to do, even under very strenuous circumstances. IMPORTANT NOTE: Make sure you grease the threads before using. I suspect some reported failures are due to dry threads.

Llegó antes del tiempo marcado, igual al de las fotos, son herramientas que ni esposo ocupa y el encantado

100%⭐⭐⭐⭐⭐

Removed the flywheel of a Briggs and Stratton 12hp no problem.

If your reading this your probably debating on buying it, just go ahead and spend the money. Used it to pull a steering wheel off a 70 c10, spent a lot of time trying to get it off myself. The tool took it off in under a minute and with no force. Quality seems good, pretty sturdy design, bolts seem good quality, threads were correct.

Gute ware zufrieden funktioniert gut