Technoline TXCOVER Protective Case for Outdoor Sensors, Outdoor Transmitter, Thermal Hygrosensors, Weather Station with Outdoor Transmitter, White

Biggest problem is getting it to stay together on the wall once the sensor was installed.I had to do a few modifcations to secure the clip that holds it all together.

The slightest touch and the base falls out. I had to secure my sensor inside with cable ties then wrap cable ties around the whole thing to stop the base falling out.A good design very poorly made.

A good enough cover for your outdoor sensor that provides shade & shelter but allows air to flow freely. It's easy to mount, with a detachable back plate that can be screwed securely into place and the main cover attaches firmly. The only problem is that the sensor sits on the base plate which hangs underneath and the two clips that hold it together are so small and flimsy that any movement in the cover dislodges the catches and drops everything on the floor. That's easily remedied by judicious application of duct tape or cable ties but it's not a neat solution to a problem that shouldn't occur

The base is supposed to lock in place by twisting but it's not very secure. It's fallen off several times and most recently has exposed the sensor to the rain - possibly destroying it. I'm trying to dry if out but it may be gone for good.

The base drops out of the housing. The latches are insufficient to hold the weight of the base and sensor. Had to resort to using a couple of self-tapping screw to keep the base from falling out.