EZBUILDER 50 Structurally Stronger Truss Design Easy Shed Kit Builds 6in–14in Widths Any Length Storage Barn Garage Playhouse Framing 2x4 Basic Roof Wood NOT Included

Love these are great and easy to use.

Found the material to be very easy to handle and use. The instructions could be better written. But I did change the design some. I built a 10x12 and raised the side walls to 93" so my peak is about 149". I will be building a loft for woodworking storage .

I bought 3 of these in early 2022, to build the large shed. I actually built 10x20, and put a door in the side. I used all the uprights, and reduced the spacing in the middle. I used sheet metal siding instead of wood. It is so tall, I had room to put plywood on top of the horizontal "C" braces for a loft for lighter items.First, the flaw. I did not find the brackets flimsy at all, as other reviews say. Quite the opposite, I was able to build all the uprights myself and turn them over without help (tips below). But, as good as they are, they are harmed by the packaging. They are pressed together one inside the other to fit in a small box. This bends all bent parts out of position. The slot for the 2x4 beam has 2 side flanges that are bent so a 2x4 won't fit. You will want to spend a lot of time bending these back into shape, especially the pointy parts. If you don't get this right, you will spend a lot of time with a hammer trying to pound the 2x4s into place. I used a planer to take more than 1/8" off the 2x4, and they were still snug in a couple places. I have no Idea how they could be packaged without creating this problem. But if you don't address it before assembly, it will be a big problem.Tips:Bend those brackets into shape before doing anything else.I built the uprights in 2 halfs, a B, an AL, and an AU. Then I laid out 2 halfs side by side and put 1 bracket on each one. Then I flipped one over and lined them up. I put screws in the other half of the top bracket, and nailed on the cross beam C. Then I could pick up the bracket by the brace and turn it over. (You'll need to be 7 feet tall to do that part by yourself.) 6 more screws and that upright is ready to set up.I assembled the uprights on the floor of the shed. I built one and then stood it up. I held the first few in position with stringers, 1x2x8". I got by with 2, but 6 or 8 would be better. Be careful when you get 5 or 6 done, you won't have room on the remaining floor. So I did final assembly on the last 6 and set them all aside, then set them in place one at a time.I did not build the door frame until after all the uprights were in place. I used all full uprights, and cut the ones I needed to the size of the door. I built the header, and set it on top of the portion of the "B" pieces I cut out, which I shortened to the correct length and attached to the adjacent uprights.Good luck and happy building.

They are good 👍

I wanted to like this product. I have a lot of framing experience. It would have been so much easier to do a traditional framing technique than to have used this kit. The concept is great! the company execution is so poor! The instructions are so lousy. why now directions for each sized kit? Why is the font so small? the concept of this kit is great but do yourself a favor and but a different product!!

Kit was complete. Found the instructions to be pretty good but the quality of the metal brackets is poor. Very thin material. There is a cut template included that is helpful but when assembling the framing and the shed I found the brackets to be too flimsy at times. Also had to notch boards to get things to fit. Too many screws needed for each bracket, made me question the structural integrity. I don't build for a living but have plenty of experience, I would buy the kit again. The shed turnout great but spent lots of time Making the kit work.

I’ve read several reviews on this product and people complain about it being to hard or to complicated and that it’s a waste of time and money ..the thing about this kit is you need to take your time and enjoy the build I absolutely loved putting it together and I’m kinda sad that it’s coming to an end….anyone can go buy a prebuilt shed and bam you’re done but their is something special and manly when you build it yourself….

I rebuilt my shed roof. These worked great in support. Made it easier to install. You will need to more of the A's for framing Hi Barn style.