ICM Controls ICM102 DOM Timer, 10 minutes Adjustable

ليس ذو كفائة عالية

Easy to replace and to configure .very accurate and repeatable .I set a 4 ton unit to 6 minutes .No more rapid cycling issues

I'm using it to delay my spa pump while the valve actuators turn to the correct postion. I just ran it in series on the coil hot wire to the pump relay.

I have used these kind of devices to protect my outside AC unit in the past. The ICM102 DOM Timer does what it is designed to do. It comes with a schematic, so you know how to wire the device in your Control system. You separate the yellow wire, wire nuted to the thermostat wire coming to the AC unit and place a stacon connector on the wire you separated from the thermostate wire. You simply get a spare wire, put a stacon connector to one end of the wire and wire nut the other end of the spare wire back on the thermostat wire. Plug the wires into the device where indicated on the supplied schematic, set the timer to the minute you want the AC unit to wait after a brownout occurs and you are protected from brownouts.

Does not time after 5 months and vender will not refund or replace

This is perhaps the easiest way to stagger start systems that use slave relays. It's hard to set a precise time delay but fine to get past the inrush current of one motor before starting another.