4 Pcs Silicone Resin Molds with Grinder Mold- Premium Resin Rolling Tray Mold and Resin Jar Mold with Lid Kit for Spice Grind and Storage, DIY Resin Epoxy Casting Craft

I must say I am thoroughly impressed with the durability of this set. Pic I took is after making 2nd set. I am new to resin and it was so much easier than I thought it would be! I made 2 sets within 24 hours of each other and demolded at 12 hours just to be sure. A couple of previous reviews allowed me to prepare for any troubleshooting that may be necessary. The tray mold... to be sure the resin got in well I used the toothpick u will need for the grinder and lift the lip of the mold as u pour - and after, going around the circumference to fill any air pockets u see. You have to be careful demolding at 12 hours with tray because it is still pliable (bendable) but i just laid face down on table and applied light pressure with hand n put up to fully cure. I also used toothpick to lift one end of mold and work around full edge lift lip from the curved end and mold comes right off with ease to prevent to much bend then laid on table to make sure level as I mentioned. Now the grinder(*update at end*) plus new pics.... a toothpick is definitely going to be ur bestie lol! I considered not adding color til pour as suggested but I’m notoriously hard headed (Taurus) so my 1st one(amber colored) the top was easier to see cause it’s thinner n I just poured despite seeing the reviews lol n stood over it stabbing at bubbles like my life depended on it! Same for the bottom piece but was less enthused at this point because of the depth of color I just had to wing the location n pray I got most of them. I guesstimate about 7 spikes didn’t fully form but my fault not the mold and they are very sharp despite the missing and break my herbs (as they say lol) up great! My black grinder I did a bit different I have a dropper from a candle kit (I’ll add pic) the tip is tiny n fits perfectly in holes I put toothpick in hole while filling individually n 2 or 3 stabs with toothpick as u remove once done fill rest of mold. I only missed 1 that time. So u can add color before pour but if so u should fill individually. The stash jar and lid were the easiest to pour. The jar is a little tedious to remove but u will get easier after the first time let the air get in as u release the mold and a slight twist pops right out. Grinder spikes won’t break but scary still so release edges then sit grinder side down n pinch sides of mold like a taco and it will release. And lastly I don’t see ppl mentioning alcohol to release bubbles? I’m sorry not using anyone’s lighter or flame near chemicals or my mold lol! I found 90% alcohol in spray bottle (never saw like that n so convenient) at my local Rite Aid. Spray over the molds after pour n u can see the bubbles disappear or raise to surface n pop with the pick. U can work the resin (popping bubbles I mean) lol in the mold for a good 20 min n no affect to resin there will be some super tiny bubbles but not so much where it takes away from the item itself n minor imperfections make it truly custom n that’s what my business entails. I will definitely buy again so I can make more than one at a time😔😀! Hope this helps I feel reviews are super important! Almost forgot the most important which I can never find how much resin oz mean nothing when measuring cups come in ml smh so I used amazing clear cast resin which came with cups that measured 30 ml. the jar and lid took 2filled to the rim cups of parts A and B (so 4 ttl) and the same for grinder n tray it will appear like it’s not enough but it’s just right n no waste and the size resin 32oz 16+16oz I have I can get 3 sets out of easily! Now that’s a review!!😂 *Update I have this down to a science now! LOL. I did order another to handle the multiple requests grinder was a little warped but I manage ehh. Im adding update for those who may do this a a small business and may be pressed on time like i am. I pour the resin clear in the grinder now (less materials needed and less tedious)....just enough to cover the spike holes and then toothpick the bubbles then add my colored resin and mix with a popsicle stick or just dye to create an effect. I love them and my customers do to.. I took out pic of resin I used as Ive learned the brand is important and I have a new fav(SigWong) that has a true 30 min or so work time, its also pkgd to accommodate the weight difference of the 2 parts til u get to the gal - great for beginning resin users cause there wont be any excess! and crystal clear which is important when doing clear resin pieces some yellow over time. New pics are the last 5. Enjoy crafting and Go Bills!! :)

Fast shipping. Initial thoughts are the molds are real good quality. Sturdy and well made. Packaging was very good and classy. Directions are detailed, easy to follow, and spot on. Checks all the boxes you could hope for. Recommend 100%

Great products and they were great for my new hobby

The mold is very good and sturdy only issue is when pouring the tray you have to make sure you go around the lid with something or else bubbles and empty spots will occur scene with the grinder portion I had to use a bobby pin to push the resin down a bunch of times and get as many air bubbles out I also use my heat gun at a very low temp kind of far but just enough to hit to help reduce air pockets besides that it is a very good product I love the jars but with that also make sure you get resin in the grooves to close it otherwise you will get air pockets

I like that it was easy to clean the most

Awesome !

Very impressive molds well-made cannot wait to use them. I’m very happy with my purchase

I only received the grinder and not the other 3 pieces of the 4 pieces that were supposed to be included. I should of read the reviews before purchasing. There are many bad reviews that are recent with the exact same issue.Update - 3/20/23I have been in contact with the seller and they have made things right and decided to refund me my order. I am very pleased with the communication of the seller but it was disappointing that I didn't get what I had intended. Long story short, this could've been a manufacturing issue that was resolved within a week of "receiving" items.

I was suppose to get my 3pc resin tray set by Tuesday, but it arrived four days earlier which I’m excited about, I have used it as yet, but so far no damage to delivered packaged and mold seems pretty good✨ Can’t wait to use them!

Me gusto mucho la calidad y la facilidad de uso

Fast shipping. Good quality molds

Llegó súper rápido, excelente calidad, tiene garantía, ya quiero usarlo y en cuanto lo use vendré a dar mi opinión

Molds are easy to use, easy to clean. Resin products turned out great.