Ibywind 2 Pcs Screen Protector For OnePlus 9 Pro 5G 6.7",Flexible TPU Film,With 1Pc Camera Lens Protector,1Pc Back Film,Bubble Free[Easy to install]

Best screen protector I have bought so far. The 'easyinstaller' alignment tool made install worry free. I even put on the back cover, even though I didn't need to since I use a phone case. It is clear, and looks great on the phone. The glass feels so smooth. Like silk, even after weeks of use. No finger prints! The glass does not have curved edges like the phone. But I think that is good. And having a case protects the sides. No bubbles. I recommended the brand for my son to buy.

I use my OnePlus on a gimbel and for my drones. So protecting it is importants esp with the 50 & 48 megapixel cameras on the back. This protector provided me with both the screen protection that I needed along with the back camera protection I needed. There was no change in the touch sensitivity, It is hardened glass and has held up to multiple surf fishing trips. Both the front and rear covers fit like a glove on the device and were easier to apply than the normal ones I use for my iPhone. The is no issue with clarity or visibility on either the screen or the camera (to me very important) and I was able to actually film a rocket launch last weekend that came out stunning. I will be purchasing from this company again

If you're getting this over other screen protectors because it appears to offer a three-in-one with front and back films and a camera lens protector, do NOT figure the additional back film into your decision unless you're immediately putting it inside a separate case. The back stick-on grip? Didn't even last a day. It's not sticky enough so the edges don't stay put, and the whole thing progressively peeled up over the course of 48 hours and pockets. Dust and lint easily get under the raised edges, which then force them higher and then more can get under... and it's a very aggressive cycle. The front has the potential to work like a dream, however. The aligner is what makes the difference over other TPU films. It allows you to quickly and easily align and attach the film perfectly. I recommend using a piece of tape on the bottom of the aligner to keep the whole thing from popping off once you've stretched and stuck the middle (and while you're attaching the top... it definitely wants to pop off). The "metal" camera protector is "ok". It sticks. It's a matte finish. It's not pretty it's not hideous. That's pretty much it.

I bought this product for the screen protectors, didn't really care for the backing film nor the "camera protector" since my phone is in a case. I just applied one of the screen protectors, and it fit my OnePlus 9Pro PERFECTLY. The application of the screen protector was simple. I was worried that the rounded edges on the left & right sides of the phone would give me trouble, but with this flexible TPU film the edges came out perfect, no bubbles, no lifting. Following the application, I tested the fingerprint reader and had no issues unlocking my phone. It doesn't look to be negatively affecting the touchscreen. It's all working smoothly as expected. Everything you need is included in the box. HINT: WATCH THE INSTALLATION VIDEO BEFORE APPLYING PROTECTOR. 2nd HINT: shut off your phone before application so your screen doesn't activate during the installation process. 3rd HINT: make sure the table/desk/surface you're working on is stable, clean and as free of dust/hair/dirt/lint as possible. I will update this review in a few days if there are any changes, but as of this moment, the installation looks rock-solid.

good screen protector for good price.

Easy to install, seems pretty decent, but there are 2 major issues which will make me return this. 1. Most cases curve around the edge, making the screen protector want to lift up. This is probably more of an issue with the case, than the screen protector, to be fair. 2. The touch sensitivity is destroyed. In mobile games, it won't detect rapid movements, or in some cases, presses at all, which for games like CoDM, makes it unusable.

These are easily the highest quality plastic screen protectors I have used. I normally prefer glass screen protectors but all of yhe options for the OnePlus 9 pro are low in quality. These TPU screen protectors provide great protection and a high viewing quality that does not affect the usability of the phone. The included rear skin is decent in quality but difficult to apply, the camera protector is also very nice with scratches rather easily and wears down after a while. The highlight of this product is the quick and easy application. They have lasted me about 4 months on average. Overall highly recommend.

The guide piece for installing is amazing. Super helpful, but the adhesive they use is worthless, it does not fully adhere to phone, falls of after a couple days. I've gone through 3 of these already... Never had a problem with glass screen protectors like this before.

Enig skeptisch heb ik dit product gekocht omdat ik eerder 2 verschillende glass screenprotectors had gekocht (van totaal andere merken ook) . Maar deze paste niet goed. De Oneplus 9 Pro heeft net een curve in het scherm en daardoor pakken glazen screenprotectors niet lekker. Een TPU (thermoplastic polyreuthane) screenprotector leek de uitkomst omdat deze veel flexibeler zijn. En dat is het inderdaad! Ik vond het aanbrengen zeer gemakkelijk, de instructies duidelijk (eventueel is er ook een YouTube filmpje) en de screenprotector voelt fijn. Niet stroef onder de vingers bijvoorbeeld met swipen. Fingerprint scanner werkt ook gewoon nog steeds prima. Ik gebruik het originele hoesje van oneplus en deze werkt prima samen met de screenprotector. Je krijgt ook 2 screenprotectors dus mocht je een fout maken, geen zorgen, je hebt een back-up. Wat trouwens ook erg handig was, was de "mal" die bij de screenprotector zit. Dit product vooral gezien de prijs verdient daarom 5/5 sterren!

OnePlus 9pro telefonum için benzeri birçok ürün satın aldım ve hepsi pişmanlıktı. İnanın en iyisi bu teşekkürler anlatıldığı gibi bir ürün

I am not usually one to write reviews, and this is the first product on Amazon that I have written feedback for. I was taken aback by how many bits and pieces there were for a simple screen protector application, however after many times of applying screen protectors over the years I have owned a mobile phone, I understand the frustration of not getting it right in one go. All the pieces worked together and I was able to apply my screen protector in one go, with no mistakes, bubbles or having to re-align the protector. I do however have an issue with the holding piece. The instructions require a plastic piece to be put into the charging port which helps with aligning the screen protector. The oneplus 9 uses USB C, however the plastic piece was in the shape of microUSB. I was slightly concerned that it would damage my charging port, however it did still fit in place.

Packaging was very attractive and neat. Instructions for installation were clear and I like how it came with two of everything.

This protector really worked! Application was much more foolproof than other TPU protectors I've used on other phones, with a plastic bit that holds the film in place and a small adhesive part in the middle that locks it in place. No need for extra bits of tape to hold it in place. The first application failed, mostly down to my lack of skill. no matter how many times I've put screen protectors, I always end up messing one up. Second one went perfect, bent around the edges of the screen, no bubbles. Touch is incredibly smooth and fingerprints worked straight away. You couldn't tell there's a screen protector at all. By comparison: I had tried a couple of top-rated tempered-glass protectors. The first one came broken (both inserts). The second one was branded differently but was the same product. Fingerprint scanner was not working so I had to discard and replace the glass. Second one was better, but the feel of the touchscreen was a lot less sensitive than it was and I had to recalibrate all the fingerprints. In a matter of weeks, the protector was already cracked and the fingerprint scanner was quite unresponsive. I think that was the last time I buy a tempered glass one.