Rain BirdBVAL50-1S Drip Irrigation 1/2" Barbed Valve

Great product! I used it to extend my Rainbird irrigation system that seems to have been discontinued since I bought and installed it years ago. This was an ideal fit and easy to install.

Does what I needed it to do for my garden.

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places.With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches.All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

This review is for a variety of products all in one. This spring (2013) my wife and I put in 2 4'x20' raised bed gardens in the back yard for growing flowers and veggies. We live in Tennessee and the middle of the summer is hot and dry. I wanted a way to keep the plants watered and decided to convert a "spray zone" of our irrigation system to drip. I set up the garden with short rows that run the width of the boxes. I designed the garden with lots of short rows that run the 4' width of the boxes. Imagine a railroad track. The rails are the "feeder lines" that run the length of my setup, and the drip lines are the railroad ties that cut across the width of the garden (parallel with the rows of plants). I needed "feeder line" to bring the water to the drippers, and a variety of connectors to put it all together. I planned it all out on paper first, and then made sure I purchased enough parts. I purchased the following products for my setup:Rain Bird Landscape Dripline System 1/2-Inch Emitter Tubing With 18-Inch Spacing - 100-Foot Roll (5 stars)Rain Bird BT50-4PK Landscape Dripline System 1/2-Inch Barbed Tees, 4 Pack (5 stars)Rain Bird BE50-4PK 1/2-Inch Barbed Elbows (5 stars)Rain Bird EC50-Rain Bird GS50-10PK Landscape Dripline System 1/2-Inch Galvanized Wire Secures, 10-Pack (4 stars)2PK Landscape Dripline System 1/2-Inch End Closure Fittings (5 stars)Rain Bird Landscape Dripline System Spray Head To Drip Connection Kit (5 stars)Rain Bird T63100-BULK 1/2-Inch 100-Feet Landscape Dripline System Blank Tubing Roll (5 stars)These parts were all high quality, and I am extremely pleased with the setup. I cut all the tubing to size and layed it all out prior to putting it all together. It is very difficult to fit the tubing over the barbs, but once on it stays in place and doesn't leak. My hands ached after putting a bunch of the tubing together, so I ended up using leather work gloves which made things go a lot better.A few things to note:1) I don't have a rainbird setup, and this kit fit in great with my existing irrigation system.2) The tubing is a bit stiff and can kink easily, but works very well, so be careful when connecting things.3) The tubing and barbs are not the same inner diameter as stuff you can get at plumbing supply or home improvement centers. That means you can't mix and match, which is ok with me.4) I used some teflon plumbers tape when attaching parts that screw in.

no fight to install