Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status + 60cm USB 3.0 Cable (GPU Ethereum Mining)

Some of them work and some wont. Waste of Money.

Great project, performed as described.

Funcionan sumamente bien, lo único incomodo es que el puerto sata lo tienen en un lateral en vez de en el frente o atras, lo que dificulta usar menos cables sata si vas a conectar más de una tarjeta.

I bought this PCIE riser specifically to mine crypto and it works extremely well. It’s was simple to set up and was in pretty good quality. I’l definitely buy more as I expand my rigs.

Sometimes when testing computer hardware, you need to test graphics cards. If you have a testing motherboard hooked up to a power supply on a table or bench, sometimes the GPUs can be hard to stand upright or they have a decency to “lift” themselves out of the slot.This adapter, even though it was designed to be used in a *coin mining environment works great. Simply connect the adapter to the PCIe connector on the GPU, apply a power connector to the adapter, plug the PCIe x1 connector in your motherboard and off you go. The USB 3 cable is the link between the motherboard adapter and the PCIe slot adapter.Note: don’t use multiple power connectors plugged into the adapter. You may overload the power delivery circuitry and make it release magic smoke. I haven’t tested this, but more just a friendly heads up.Note that this will not power a GPU solely from the PCIe slot, you’ll need to plug another connector into the GPU power connector. It may even fail if you solely ran the GPU from the power the slot provides. I tested it with a bus powered GPU with the adapter connected via the male SATA connector and it was peachy.Recommended, but don’t push it too hard.

Takes a little work to figure out how to use on certain cards but work and are of good quality. Would buy again...