





Desertcart purchases this item on your behalf and handles shipping, customs, and support to EGYPT.
📐 Cut like a pro, every time — because precision is the new power move.
The Kreg Straight Edge Guide XL-8 Ft transforms your circular saw, jigsaw, or trim router into a precision cutting tool with its sturdy 8-foot aluminum guide rail and anti-slip clamp system. Compatible with right- and left-handed saws, this portable, professional-grade accessory ensures straight, repeatable cuts on wood and large projects, making it an essential upgrade for serious woodworkers and DIY pros.
| ASIN | B08BQ72SVD |
| Best Sellers Rank | 169,125 in DIY & Tools ( See Top 100 in DIY & Tools ) 13 in Planer Edge Guides |
| Blade Length | 1989 Inches |
| Blade Material | Alloy Steel |
| Blade Shape | Round |
| Blade material | Alloy Steel |
| Brand | Kreg |
| Colour | Metallic Gray |
| Country of Origin | China |
| Customer Reviews | 4.3 out of 5 stars 643 Reviews |
| Handle Material | Plastic |
| Included Components | (1) Aluminum rail section with clamp head & indicator bar, (2) 24’ sections, handle and hardware, (6) Connector bars (2-piece design) 24 set screws hex wrench, Adjustable Clamp pad bar |
| Item Dimensions L x W x H | 23.1L x 23.1W x 23.1H centimetres |
| Item Highlight | For Circular Saw, for Accurate Cross Cut and Rip Cut, Aluminum Guide Rails, Professional-Grade |
| Item Type Name | Saw Guide |
| Item Weight | 7.2 Pounds |
| Manufacturer | Kreg |
| Model Number | KMA4700 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Number of Teeth | 24 |
| Other Special Features of the Product | Portable |
| Part Number | KMA4700-E |
| Power source | Corded Electric |
| Special feature | Portable |
| Specification Met | Yes |
| Surface Recommendation | Wood |
| Surface recommendation | Wood |
| UPC | 647096810559 |
| Unit Count | 1.0 count |
| Warranty Type | Limited Warranty |
R**L
The clamping system
The clamping system is brilliant, well thought out,should have brought sooner
D**N
Extra-long aluminium guide for accurate straight cuts with a circular saw
Sturdy, easy to set up and helps keep cuts straight and accurate. Great for larger woodworking projects.
M**T
This thing is great
I set up the bars that if I placed the part before or after the line (see pictures) would determine which way i'm cutting. In that, which way I measured. Facing it, if i measure from the left I wanted to have them on the left side of the line so it would be accurate, and if I measured from right, right side of line. This was due to depending on the cuts I had to make, sometimes the greatest amount of plywood left would be on 1 side or the other, but my saw always runs from the handle. It's how I set it up. The thickness of the pointer on the plastic arms is right around the thickness of my blade. It might be off 1/16 from the exact size of the blade, but not enough to make a difference when cutting plywood for cabinets IMO. I am finishing my basement that includes cabinets for a kitchenette. See picture of installed bases pre doors/countertop. These were all cut with this tool on 3/4 plywood. I used an online website to get cuts so i could purchase the least amount of plywood. Used this tool to make all the cuts. The reason for the lines is to double check my measurments. I have a tendacy to measure 3.5" at the 2.5 (opposite side of the 3) without realizing. So I'll use my T square 48" long and make the cut line and just verify that i'm not F'ing up. I also wanted to make sure the cuts were right on the line. Besides some wobble here or there when I wasn't holding it steady against the track, you could just see a sliver of line left. Perfect for how I measure/mark. I think the cabinets look good and this tool was perfect for me and not too expensive.
A**ー
コンパクトに出来て使いやすい
梱包に使われている段ボールと付いてくる物は全てとっておく事をお勧めします。4分割されていて組み上げて使う形です。組み上げに使うのは2.5mmの六角レンチでTハンドルみたいなのがあれば楽に組み立てられます。組み上げは5分もかからないです。使う際にブレが気になる方はクイッククランプ等で締め付ければブレたり動く事はありません。大きな板を切断する方にはおススメです。
N**R
Muy practica
Excelente herramienta para cortar de manera derecha y sin falla
G**Y
Great
works great
A**ー
抑えが甘い
クランプを使わないで、長い直線を複数の機器で加工出来るのなら便利だと思い購入。 しかし、どんなにきつくしてもコレ単体では抑えが甘く材料によっては動いてしまう。結局は終点だけをクランプで止め加工。 発想はいいと思うが今一つ…
Trustpilot
5 days ago
2 weeks ago