AC Compressor Clutch Replacement Compressor Clutch Coil Assembly Kit Compatible with Nissan Maxima Nissan Murano Nissan Quest Nissan Pathfinder 3.5L

Instal was easy and took maybe 30 minutes. First step was to check that scan tool showed compressor request then test old coil with 12 v and confirmed not functioning. Then remove right front tire then inner fender cover like getting to oil filter. Remove belt with 3/8 breaker bar, remove connector, remove 10 mm bolt from clutch and remove plate, remove snap ring then gently pry off clutch, then remove 3 Phillips screws. Assembly is opposite. Now my air works perfectly. I just hope it is a quality part and holds up. It would be nice if there were a few instructions in the box. For example there are 2 shims to set air gap. Your old one likely also had 2 shims. Using all 4 I still did not get the .3-.6 mm air gap spec for the 2014 pathfinder. I had to add a washer.

I have a 2012 Murano and it fit good the only problem like everyone said not enough shims. Don't worry go to home Depot they have thin washer that will work. They are number 10, now you have to take a little off the outside with Dremel tool and a little off center hole. I got twelve for 1.50 a little trimming and I mean a little is better than 5 for 30 dollars. I set my air gap at.025 and torqued the bolt to 13 ft pounds. I hope this helps. Product works

This clutch did the job. Unfortunately, the compressor seized up on this truck a month later and had to replace the whole unit at that point, but this clutch worked perfectly fine in the meantime.

Was happy with the quality and packaging of these parts they fit perfectly in my 2013 Nissan Pathfinder. Saved me tons of money doing it myself. It had everything I needed I simply used my spacers from my old coil plus the 2 sent in this parts bag on the new coil assembly. My suv was putting out warm air noticed A/C clutch not engaging it ended up being the coil so I recommend this product.

Did not fit my vehicle as stated on the description. Nothing worse than being half way done to find out it doesn't fit. Don't waste your time with this.

Used on a 2013 Nissan pathfinder SlIt fit perfectly we also got a new serpentine belt. Used the car immediately after replacing everything and it has been working perfectly. No need here to take it to a garage just watched a few videos on how to do it. Pretty simple. There's only one way it goes on so can't mess it up really.

Overall this feels like a good coil/clutch assembly. I installed it without any issues except for the shims, after using the original and new shims it was still short .06in. Luckily I was able to grind down a washer I had to fit. I gapped the clutch plate to .020inch and it worked great. I did use the original bolts instead of the new because of some reviews I've read about them snapping. It's been 2 weeks and still going!

It fit for my vehicle (2009 Nissan Murano). The only thing that I had to do. Add the old spacers with the new ones. Installation was easy with the right tools and good YouTube videos(lol). I'm glad I researched to diagnose the problem and a YouTube video led me to this product. Saved me a lot of money and just about 2hrs to do. I'm no mechanic, just a DIY kinda guy. It has already been over 2 months and I haven't had any issues. I believe my A/C blows a lot colder than before.