Govee Car LED Strip Lights, Smart RGBIC Interior Car Lights with APP Control, 4 Music Modes, 30 Scene Options and 16 Million Colors, 2 Lines Design LED Lights for Car Decor, DC 12V

Installed these in my Audi Q8 e-tron, which has basic white LED interior lighting, but I like having footwell lights on all the time while driving at night. Like others have said, the adhesive didn't hold for long, so I found some small screws and used the mounting holes on the ends to attach these to the vehicle. No, I'm not flashing these with my news/talk or classical music stations, I'll leave that for you youngsters and your hip-hop stations. (Although I'll turn to the flashing mode temporarily just to make my young adult children groan.) The ability to change to any color I want and adjust brightness is great. I find the deep blueish hues to work best for constant on while driving and not distracting/reflective. I don't use the hardwired remote and just leave these on all the time, even in daylight. LED draws very little power. I found the app to be easy to use and configure the lights the way I want them - I just set it and forget it. I paid under $25; price is higher now. Overall, a pretty low-cost way to add interior lighting to your vehicle.

The media could not be loaded. -The Good-Completely changes the feel of the car. Looks great. Remote is available for quick control (On/Off, small range of solid lights (9), and brightness). App provides TOTAL control of the lights. So many possibilities of different colors and sequence of illumination it's virtually unlimited. My head is spinning 😁👍🏽.Installation - Much easier than I thought (2022 Honda Accord). Recommend laying all the lights out and finding good surfaces to attach to. Ensure the wires reach and can be hidden whenever possible for a clean look. Attach adhesive surface as the ABSOLUTE last step. Check that lights light up, wires reach, and hide wires before attaching LED strips to car.-The Bad-App - There are a couple of different options for download so it's not crystal clear, but still not too hard to figure out.App Setup - Not completely bad on the product but my era of not paying close attention to the model number I purchased. If you don't put the correct model number in the app then it's as if the phone and app just can't find each other for the Bluetooth connection. And you are forced to connect the lights to your phone through the app. You cannot go through your phone's settings like you do for ever other Bluetooth enabled product.Adhesion - I saw many complaints in other reviews before I purchased so I planned accordingly. I bought some Alien Tape from Lowes just in case I would need some extra stickiness to keep the lights in place. It's been a couple of weeks since I installed the lights. Of the 4 light strips the only one that occasionally looses it grip and falls is the one under the drivers seat. After it fell the 2nd time I used the old Alien Tape (double sided). Even with the Alien tape (which is really sticky) the strip still slowly becomes dislodeged. Translation--> The adhesion for this product is not terrible, but it's not great either. You have to really try to find a good even, smooth surface to attach too. Under my seats there is cloth and I can't really see the surface, only feel for a good spot to attach. The strip under the back of the passenger seat has held with no problem or Alien Tape.-Ugly-None-Summary-Truth be told I would give a 4.5 if I could but decided to round up. I actually already recommended this product to my wife so there you go. I'm putting my personal safety and well-being on the line to recommend this product to others.

They are a good LED strip light for footwell lighting in a vehicle. A couple of notes:1.) I actually installed mine backwards from what the illustration shows. I wanted to power them from a 12v outlet I added off the dash fuse block (as opposed to powering them from the center console) so the rears are installed in the front and front installed in the rear. Works just fine that way and I had plenty of wiring to do so. Someone with a larger vehicle may come up short.2.) You DON'T need the app to operate this in a basic way. You can select the color, brightness (big plus for using them in a vehicle), and turn on the audio sync from the buttons on the wired controller. If you want to have special lighting effects, you will need the app. But basically, they work just fine without it. It will also remember the last mode from the previous power up, so if you are like me and want to keep them on the same color, you won't have to reset them every time.3.) As others have noted, the adhesive does not work. Do yourself a favor and order the 3M VHB tape with this. You'll thank me later.

Awesome! I remember having similar lights on my vehicle back in the 90s with less options for more money. These are great, easy to install for very little cost. Adds cool colors and effects to jazz up any car. Love the bluetooth app, fits under pretty much any dash and seat.

After taking my time unkinking the lines and eyeballing routing of the wires and positions of the strips, it took me around 40 minutes to mount the strips, route the wires so they were hidden, download the Smartphone App, and get the lights running. I went with the 4 LED strip kit as I rarely have passengers. I installed this in a Kia Carnival MPV and used the 12V connector on the rear of the center console as the power source. One drawback was that the included adhesive attachment strips on the LED lines failed after just a few minutes even after careful cleaning of the attachment locations with alcohol swabs. I know the directions say to secure the ends of the LED strips with ties or screws but that was not an option for me as both ends of the LED strips ended up on void areas. Luckily, I had on hand some HD dual sided mounting tape (search Amazon for "deli double sided 120") that I overlayed on their tape then attached the LED strips where I needed them. The HD tape is wide enough that the strip can be cut in half lengthwise to use with 2 LED strips. Worked great. The footwell lights are so bright that I had to adjust them down a bit. There are also lots of different lighting patterns to experiment with on the Smartphone app. This setup effectively provides the same type of ambient lighting (footwell only) as the dealer installed option for a huge cost savings and you get lot more effects including music sensing.