007314W Blender Cutting Assembly

Was shipped quicker than stated! Works perfect. No more leaking. 5 min to install. Two 7/8" sockets, a 3/8" socket, and extention bar made life easy. Watch the torque because glass. Also the big nut on bottom is opposite tread. Small acorn nut is normal tread.

This is the complete cutting assembly with all washers and the many needed sealing o-rings. My blender jar had begun to leak, even with the assembly periodically tightened. I was going to replace just the o-rings (there are 4) but decided to try the entire assembly of 18 pieces, not including the blender jar or top. Glad I did because the new, much sharper, blades, have made a positive difference to blended drinks. PRO's: perfect replacement parts, crazy easy to install, almost a new blender for only a Jackson. CON's: getting old assembly out of blender jar can be problematic. To remove old assembly, most instructions have you remove the wagon wheel coupling on the bottom of the jar by stuffing the jar with a towel to keep the blades from turning, and unscrewing the coupling. Unfortunately, this did not work for me. The coupling was screwed to the shaft more strongly than the cap nut on the top of the shaft inside the blender and that cap nut came off first. So what to do? After removing the cap nut and blades, put a long piece of wood against the top of the shaft and tap (not pound, not ram, just tap) the wood until the shaft comes out the bottom. Yes, there is a risk of breaking the bottom of the glass jar, but I saw no other way of removing the coupling. After the shaft is removed, us a 7/8" wrench on the bottom and 7/8" socket and extension inside to hold the respective nuts. This nut is reverse-threaded, like a propane tank connection, so clockwise loosens (the opposite of "lefty-loosey, righty-tighty"). I have two of these glass blender jars and I replaced the cutting assembly on both. The first took about 15 minutes to figure it out, the second took less than 3.

This worked great on my Waring MBB518, but it came with four rubber seals. I had to remove one of them to get the bottom nut on, unfortunately, but given its position I don't think it makes a difference.

Fits perfectly, easy to install, no leaks, and a great value compared to a new container or blender. Keep your appliances as long as possible and fix it yourself.

This is a replacement for the blender cutting blade and gaskets. My glass carafe was fine, but the gaskets had begun to leak. This appears to be a factory quality replacement. For DIYer's PLEASE NOTE: 1) the bottom nut that holds the gaskets and large washers is purposefully tightened counterclockwise (or if you prefer the "lefty loosey" mnemonic, it is "lefty tighty"). This is not uncommon since the blade turns clockwise (looking into the carafe) and it would loosen the nut with use otherwise. Everything else is "clockwise" or "righty tighty". The carafe is difficult to clean of the old gaskets because there isn't much space to get your hand in. The bottom gaskets were straightforward. Mine kit came with a spare washer to squeeze the gaskets. If you try to use it, the bottom nut won't fit. Don't overtighten or you'll risk cracking the carafe. Mine worked fine after installing… no leaks.

this Waring 007314W Blender Cutting Assembly for a client at my repair shop, and it was exactly what we needed. The part fit perfectly and was easy to install. The build quality feels durable, and the blender was back to running smoothly after the replacement. The blades are sharp, and the assembly performs just like the original part. My client was very happy with the repair and the results. Great replacement part at a fair price. I would definitely purchase it again for future blender repairs.

Has given new life to my 25 year old Waring professional blender. Another reviewer, Tomas, has provided an exploded parts diagram of this assembly - use that as the reference when fitting the part and you won't go wrong. Ignore those who say they are extra parts you should dispose of!!! One point that might help people remove the old part is that the larger nuts that screw to the carafe body have a reverse thread. By which I mean that, instead of turning clockwise to tighten like most nuts, they turn clockwise to loosen. Knowing this will save you lots of time trying to get the old part off - I spent quite a bit of time making it a tiny bit tighter before realising it was reverse thread, after which it came off in a few seconds.

My blender is 20 years old and the only thing that fails on it is the blade assembly. It’s the second time I’ve replaced it.

Replacement part works great!

Way better than buying a new blender. When a part of our many-years-old but well-functioning blender wore out, we thought it might be time to replace it. I checked Amazon and found the replacement t part for 1/4 of the cost of a new machine. It arrived in two days, was installed in two minutes and the unit is good to go again.