50pcs Drip Emitters for 1/4" Drip Irrigation Tubing, Adjustable 360 Degree Water Flow Drippers on 5" Arrow Stake, Garden Irrigation Drippers for (4-7mm) Watering System

The built on stake is very useful for positioning. The flow rate can be very high or just a dribble, so it is easy to combine different sized containers on one system, or to water large areas. These are terminal fitting, no flow-through. For dribbling, you can tee several of these of a 4mm tube. It takes a lot of water at high flow - wide spray so each then needs its own 4mm tube from a larger (13mm) supply pipe.

Nice product, well made and easy to use. Simple twist action to adjust water flow. Stake is a good length and strong. As always pipe that connects will need warming in hot water before pushing on to connecter. Highly recommend.

It's true that the nipples for attaching the micro tubing are somewhat bigger than on Hozelok products. But a judicious use of emery paper and boiling water solved the problem. And, at approximately 30p each (compared with £1.50 for Hozelock equivalents) they're good value. The spray pattern adjustment is not quite as sophisticated as the Hozelock equivalent but it is manageable. They're such good value that I recommend them if you're prepared to fiddle around a little.

i had ordinary drip feed before, these are a game changer, I can now put different plants on he same system and the all getthe ampount of water they need. can be turned completely off too.

They have "click stop" adjustment, and I found that one click after "a dribble" provided far too much water. So not adjustable enough for me.

Hard to push onto pipe.

Fixed a length of pipe with these droppers, and got water through about 2 metres. A lot of time and money wasted. Reverted to the hosepipe.

I initially bought another kit, but it was not good enough, so I had to buy another product, and I choose this one that I have to say it was very handy to have them, they’re okay quality, but I prefer it that you can put them directly into the ground, and you don’t need an additional piece of plastic to hold them on. I am pleased with my purchase

The media could not be loaded.  I was looking for some simple low pressure watering heads for my garden. Something a step up from drip irrigation, but not as powerful or wasteful as some of the more high end irrigation systems that are more suited for watering your lawn or bushes.Do not be fooled by the "drip emitters" in the title, they are more useful than a simple drip head, although you can adjust them down to a simple drip if that is what you are looking for. In my case I have them set so they saturate the soil around my plants so they provide more a deep watering, without splashing up on the leaves. In the video I included it shows the test run before I added my plants to the garden so make sure I was getting the coverage that I needed. I am using 28 of the heads, and have not had a single one that did not work. The drip holes are big enough that if you do happen to have a clog, a standard toothpick will fit and will unclog the opening. I have only had to do that a few times when the neighborhood squirrels decided it would be a good idea to dig around and inadvertently bury a few of the heads.I have been using them for about 2 months now, and they are still working perfectly with almost daily watering use.Pros:- Simple to use- Affordable for the number of heads you get- Good quality control- 1/4" connection makes them compatible with most watering systems- Can be used in open garden or grow bags- You can turn off a head so that you are not wasting waterCons:- Some are open, some are closed when you receive them. Need to pay attention to that during installation- They do not have any sediment filtering but at this price point that is not on usual- No way to set them only to deliver a "mist" but again, that is not what they are designed for.

I wasn't sure what all I would need for my drip irrigation system so I ordered these in addition to the kit I bought. Boy am I glad I did. They are much easier and better to use than the ones that came with my kit. I used everyone of them and no issues with any of them. Will be purchasing more if I expand my system. They attach easily, they stick in the ground easily and the heads are adjustable. I can control the pressure between the stations with a simple twist adjustment.

Had to heat tubing in order to attach them

These work great and adjust easily. The only negative I found is that the stake could be a little longer for more height.

Like others have said. These work well. Great adjustable application level from drip to wide circular spray (for me about 3'). Easy clean out if clogged by opening closing. The feeder barb is tight for a hard plastic feeder tube. I take a #2 Phillips screwdriver, heat it with a torch 2 seconds, shove it in the feeder tube than onto the barb. It shrinks a little when it cools and stays on under the limited drip pressure I use (5 psi ). Great value. I use in the same main lines as drip tape. So I can feed different varieties whether row or hill with same main lines. 30x60 garden, all with one garden hose to a timer split into 4 main 3/4" supplies into a mix of drip tape or these emitters. Reuse year after year.