Feature:1. This machine is hand-held, small, light, support core to core digital alignment2. 8s splicing time, 26s tube heating time, using 5800mAh and pluggable Li-battery, typical 200 cycles3. ARC is calibrated by temperature and air pressure automatically, very convenient4. Automatically switching on windshield and heater in 4 steps, easy to operate5. The product is applied to bare fibers, indoor cables and jumper wires splicingSpecification:Item Type: Fiber Fusion SplicerApplicable Fiber: SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)Fiber Count: SingleApplicable Fiber Dimension: Cladding Diameter: 80-150 Um. Wrapper Diameter: 160-900 umTypical Splice Loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)Return Loss: 60dBFiber Cleaved Length: Approx. 10 ~ 16mm / 0.4 ~ 0.6in(coating diameter<250 Um), approx. 16mm / 0.6in(coating diameter: 250-1000um)Splicing Program: 40 GroupsOperate Mode: Manual, automationAuto-Heating: AvailableTypical Splicing Time: 8 SecondsTube Heating Time: 26 Seconds for 60mm and 40mm shrinkable sleevesFiber View Magnification: 250x (X or Y view), 125x (X and Y view)Viewing Method and Display: 2 CMOS cameras, 4.3 inch color LCD monitorStorage of Splice Result: 4000 Results loss evaluationAvailable Tension Test: 1.8-2.2NInterface: GUl menu interface, easier operationBattery Capacity: 5800mAh, typical 200 cycles(splice and tube heat), pluggable inner Li-batteryPower Supply: Adaptor, Input: AC100-240V(50/60HZ), Output: DC11-13.5VElectrode Life: More than 4000 discharges, can be replaced convenientlyTerminals: USB 2.0 port, for uploading splice results and upgrading softwareOperating Condition: Altitude: 0-5000met
Trustpilot
2 months ago
3 weeks ago