Inkbird Temperature Controller Digital Thermostat Controller with 1.97 Inches Replacement NTC Probe for Heating and Cooling UK Plug

This is a well designed and ready to use temperature controller. I am using it with my hybrid solar water heating system. My solar water heating system came with a single pump and a single temperature controller. I had to set the temperature of the controller as per the season or as per weather conditions hence making it semi automatic. I have installed one more motor in the system, which circulates the water from the insulated hot water tank through the glass tube collectors. For this motor, I have used this device to control the motor as a cooling device. The original temperature controller is set to 50°C, and the original motor fills the hot water insulated tank as soon as the water temperature reaches 50° integrate and shuts oof once the tank is full. I have set the temperature of this device to 70°C. So after the tank becomes full, the collector heating tube temperature starts to rise, and once it reaches 71°C. The second motor starts and again pumps the water from the insulated water tank, which is 50°C through the collector tubes and heats it up to 70°C. And the cycle continues. This way, I have made my semi automatic solar water heater into a fully automatic solar water heater for which this device is working very well since last one month. The temperature sensor is fairly accurate and the option to set the temperature difference up to 1°C is very useful. It is a plug and play device useful for people like me, who want to do experiments, but do not have Equipment or technical knowledge of assembling various spare parts. The probe of the temperature controller is expandable with good quality audio cable. I am using it with 15 m long audio extension cable. Due to which I am able to place the sensor on the solar water heating panel and the device in-house near the original control panel. I am highly satisfied with this device primarily and it is working well since a couple of months now. Let us see how long it works and will come up with a review again after long-term use.

5/5 good for aquarium been using it for 2 year and it work perfectly

This is my second piece and it’s an amazing product . I use for keeping my unused fridge in running mode without minimal cooling just to keep it running. I have set the min and max at 19-20 and I am saving my electricity. It just consumes 1 unit for I and half day. If I used my fridge without this device even with lowest cooling it used to consume 3 units daily. My fridge is 18 years old and doesn’t have a great thermostat . So this device solves the problem

Sturdy product. Going steady after 9 months of use. Comes with clear instructions and is easy to operate with just the right number of settable parameters, temperature differentials, alarms, compressor time delay and calibration. Well thought out design, especially for novice users.

The control feature works flawlessly! The only test I had to do was of the accuracy of the probe... And that also hit the mark I needed with just about .8 to .5 degrees Celsius of discrepancy (which is perfectly fine for my needs)! I just love this little magic controller!!! Thank you again inkbird!!! You keep blowing me away 🙂❤️❤️❤️❤️🙏🙏🙏🙏

Nice product for home brewing to control refrigerator temperature. One needs a traveladaptwr as the plugs are not for indian the pin switches

It functioned adequately for a brief period of 1 week and subsequently ceased working. I would not recommend it unless you are prepared to waste your money.

My old refrigerator stopped regulating temperature so I was going to scrap it. I came along this product and now my fridge lives again! Accurate temperate control. Super easy setup. I was worried that there would be a loud relay clicking sound when it actuated, but nothing. Absolutely perfect product and I don’t even think I’m using it for its intended purpose. I won’t use the heat output so I can’t comment on it. Highly recommend!

Great piece of kit, does exactly what it says on the tin - easy to use, no wiring needed, just plug it in and set the required temperature, any problems and the alarm will sound. Simple.

المنتج وصلني في وقت قياسي، للامانه لم اجربه ولكن الكرتون و محتوياته و ترتيبه كالاصلي

Be careful you order the right model! I thought the 306 and 308 were almost the same except for the bluetooth extras. The 306 is only for heating applications (chicken coops) and won't work for cold water. I'm returning the 306 that I ordered on another platform (they didn't have the 308 which I would have ordered in the first place). The 308 does a good job with the thermostat and I'm getting used to it.

It's great device but Inam giving negative reviews because: 1. The device is locked in heating whenever the SV temperature is lower then the ambient temperature. 2. They don't replies to email support. Item will be returned if not fixed