RC Station 12mm Hex RC Wheels and Tires for Hyper Go H16BM H14BM Tires and Wheels 1/14 1/16 with Foam Inserts for Traxxas Wltoys 144001 etc 1/18 RC Car Street Tires Wheels Preglued

I rarely leave reviews but I had to with these tires because I’m quite impressed. I purchased these tires for my a 1/16 RC I bought that had tires without foam inserts and the handling was terrible. I was skeptical when I received these tires because they were smaller in diameter and width than the tires I was currently using but for the price I figured I’d give them a try. I mainly run my car on pavement or gravel and the tires handled great. I usually run a 2 cell battery in my car but did try it out with a 3 cell battery and the car still handled well at the higher speeds. I one problem I did encounter is that the 12mm hex hubs on the tires are slightly deeper than other tires I’ve purchased. Make sure that the hex nuts on your RC are at least 5mm thick or you will have to by thicker ones. The hex nuts on my car were only 3mm thick and when I put the tires on, they would not spin. Luckily for me, I already had thicker hex nuts I could use. Overall, I think these tires are great for pavement. I’ve paid twice as much for tires that didn’t handle as well. I plan on purchasing another pair in the near future. They are worth the $16 price tag.

Great little tires so far. Seem to be what I need I put then on my 16207 hyper go buggie.

Great off road tires for smaller scale cars 1/14 and smaller

Smaller than I thought

Three out of four of the hubs cracked in the hex area after rolling my 1/10 rally car. The wheels are lose and wobble with the nuts tight. I was on my second battery...

What I expected from a cheaper set for wheels and tires. Did not fit the 1/16 Slash without some modification to the body and a small washer, used as a back spacer. The tires and wheels are both larger than the stock 1/16 Slash.

this is the best deal in RC tire and wheel combos on this site. the wheel design is basically unbreakable and the tires are fit perfectly, glue included. I run these on both my 1/16th and 1/10 trucks. they have had zero problems handling a 3S brushed 550 12T. of course physics is a thing and inch wide tires can only grab so much pavement. I use these for drifts and burnouts and other wheel spinning silliness. they have very smooth handling characteristics and are even decent on light are off road stuff. I ordered a second pair of these nearly immediately.

These are a great "street/hybrid" option for the Granite Grom. They are a tad taller than the stock tires, but quite a bit narrower. They have a good grip to them, and on smooth concrete (like a skate park) they make an occassional little squealing noise like a real car. Much more street grip than stock, and handle the offroad stuff pretty well also. Great in-between tire for the money, will buy more for our Typhon Groms.