MSI MAG CORELIQUID 360R V2 AIO CPU Liquid Cooler - Rotatable ARGB Blockhead, Integrated Radiator Pump, Split-Flow Water Cooling, Evaporation-Proof Tubing, Easy to Install - AMD & Intel Compatible

Ignore the photo as such as I took pictures during the build stage of this particular PC.I needed a cooler for this build but I didn't want to spend £100's on it, so seeing a cooler for £100 with an LCD screen, I thought "Well, it's rude not to.", so grabbed it I did.In terms of packaging, it's pretty much what you'd expect an AIO to be boxed in - you have all the necessary fittings for Intel or AMD - in this case, it went on an AM5 socket.Installation was easy as such - the cabling is a bit much but you should be able to see it was relatively clean even with multiple cables coming off the block. As per the description, there's a fan over the CPU plus the two on the radiator (RGB) which were wired directly to the motherboard.Having the PC set to auto, the fans are relatively quiet (there's 5 x 120mm fans on the PC plus the block fan, plus the 3 graphics card fans) and certainly aren't obtrusive. The CPU (7900X3D) sits around 47-50 degrees and hasn't seemed to get overly hot (which TBH is expected) - I don't keep too much of an eye on it but haven't seen it go above 60 - but again, not like I watch it like a hawk. Having RGB fans is fine (you can obviously turn them off or not even cable that side of things) and as yet I don't have any concerns from that perspective.The LCD is useful - you can have it displaying your favourite meme, or information like the CPU temps - the choice is yours. It's arguably a bit ostentatious but I like to build things I've never had/used so that I know if something works, works well or is garbage. I'm more than happy with this AIO though and would use it (or the 360) in another build quite happily.

Great CPU cooler! It has a very premium feel, with high-quality materials, and the LCD screen is a lot of fun to customize - I didn't even miss RGB lights thanks to it. With that in mind, I'd say it was worth the price and would recommend it to anyone who wants a great CPU cooler and likes to have everything customized.One thing that I wish the manual told you is that, while screwing the 3 fans into the base, you shouldn't do it one fan at a time, but instead have all 3 fans in position with the screws right above their holes, and then alternate between tightening each of them little by little. If you do it one by one, you'll find that the rubber from one fan will end up covering the screw hole for the next fan due to pressure from the screws.Connecting the cooler to my AM5 CPU was quite easy, but you might want to use some cable ties for the cables that power the 3 fans, as they can be a bit awkward to manage and are quite a bit longer than they needed to be. While that's better than having cables that are too short, it would be nice if the fans plugged into each other magnetically so you only needed to connect a cable to one of them. But this is only a minor annoyance during installation, so the cooler still deserves 5 stars.

Installed this on a ryzen 7600x am5 cpu and does the job very well.It keeps cpu under 80 degrees all the time on heavy loads.It comes with pre applied thermal pad and clean instructions.The lcd screen adds a lot of style, is customisable and it gives you a lot of useful system informations such as cpu / gpu temps, load. Can also display a text or personalized animation on it.The fans are aRGB which and can be controlled via mysticlight or of your desired software.Only issue i had was the need to remove little corner rubbers on one side fron the radiator otherwise it wont fit in my msi mid tower case.The pump fan also does a noticeable noise but is perfectly normal.

Cooler itself is great. The screen has a good chance for customization and overall does a brilliant job keeping your CPU cool. Downside to this is the MSI Center needed for the customization is incredibly unreliable and will just not detect the cooler if you perform a BIOS update.If you are buying because of the price, go right ahead. If you are buying because of the screen and the customization, I would pay a little more for another cooler with a more reliable piece of software.

This product is very simple and easy to mount. The instructions were quite clear and straightforward to follow.It keeps the CPU and the case extremely cool and as per attached, you're looking at below 40 degrees on normal usage and maybe max 60 degrees at gaming on 4k RTX.The fans are also extremely quiet. I couldn't hear anything even at max load.The MSI center software is easy to use and you can manage the fan settings and lcd display all from here. Note when you attach the lcd display then it might look like it is in the wrong direction. You can adjust this using the MSI centre. Click features then coreliquid should appear automatically. Click direction and it lets you pick the correct one depending on how you mounted the cpu.You can also customise the banner, make it show the weather, system clock, images or gifs/videos or just hardware display.Overall I am happy with the product and would recommend.