JETech Screen Protector for Samsung Galaxy S7 Edge, TPE Ultra HD Film, Full Screen Coverage, 2-Pack

I can see why so many people gave this low ratings.It is extremely hard to install, and you get punished hard for any errors along the way because the film is so soft and stretchy while the adhesive is very sticky. It's nearly impossible to lift up the film again to fix anything without marring it at the least. You need to apply this in one go to maximize smoothness. One good thing is very small bubbles will eventually bleed out, so don't try to smash them out with the squeegee. That will only stretch and mark up the film.First one was thoroughly trashed but I used it to practice. Installed second one almost perfectly, and I'm pretty happy with the results. Maybe 20 minutes total. Edges stay down even at the curved sides. Some tips are to have an extremely clean work area, alcohol to clean the screen, canned air to blow dust off, pre-align the sheet with some tape, and then to apply the film per the instructions without exposing the screen again. Use the squeegee very gently to have the film adhere in one go without bubbles.

UPDATE: These screen covers actually do peel with certain types of cases. If you are using an S-View case you are totally fine, but my other TPU case made the edges peel up which was pretty annoying. I still recommend these anyway, but just be conscious of the type of case you use with it.I kept hearing about S7 Edge screen protectors peeling off easily. Well, that's not the case with these. I've had one on my phone for about 2-3 weeks now and it has served well. What I especially like is the amount of grip it adds to the much-too-slippery S7 Edge body. It also fights finger smudges well. Overall I'd definitely recommend these. Installation is very easy too and I have absolutely no visible air bubbles.Cons: Not completely invisible, has wrinkles (although not terrible)

So looking through Amazon, I wanted a cheap screen protector for my phone since I'm going to replace it soon. This one tho.... ain't it, chief. The instructions are deceivingly simple. They consist of 4 steps that should be fool-proof. NOPE. I swear, the first time I installed a sheet, there were bubbles everywhere (and I've installed my fair share of screen protectors so ???????). I took that sheet off and tried again. In doing so, I figured out that the sheets are rather sticky and do not come off so easily, so I guess these protectors get a point for that??Round two was not as successful as I anticipated. The bubbles kept appearing even though i was using the card they provide to push the bubbles out as I installed the sheet. I probably stood there for another 10 extra minutes just taking out the bubbles with my fingers since the card proves less efficient than my God-given tools smh. I finally thought I was done and took everything off, leaving only the screen protector on my phone but LO AND BEHOLD, THERE WAS SOMETHING STILL UNDERNEATH IT? TF? Before even attempting to install anything, I cleaned the screen with two alcohol wipes and then wiped it with the cloth they provided. what in the world. I lifted that part of the screen protector to clean it underneath, BUT IT DOESN'T CLEAN. I guess that thing is actually just the sheet folding in on itself. SMH. SMH!!!!! Looks like I made a dent in the screen protector trying to take out the bubbles OMG. I SWEAR. At this point, I just want a replacement protector so I don't have to stare at this messed up one. THANK YOU SO MUCH FOR THIS PRODUCT. WILL NOT BUY AGAIN. OMG.Also, if anyone's at all curious, if you for whatever reason (like a normal human being) have any oils or actually ANYTHING on your fingers, they WILL transfer to the screen protector. There are so many smudges on my phone right now, BUT MY HANDS ARE DRY OMG PLZ.This is the first really bad review I've ever written. Rant over. lol xd

This screen protector does not cover the entire s7 screen. With all my cases you can see the edges. I'm glad it came with 2 because the first one made me want to throw my phone against a wall. The second one I was finally able to get on. It had major bubbles but disappeared within 24 hours, which is why I gave it a 2 star. In the light you can see funny shapes under the plastic from where the bubbles disappeared. Screen protector isn't bad, its just too small and frustrating to put on and I've put on these types of protectors on my phones for years.

The other reviews that say it's difficult to install are completely right. I tried winging the install and doing it like every other screen protector I've installed, and failed miserably. The material is a bit stretchy and the adhesive is super strong, so if you don't have it perfectly aligned any attempt to remove and reposition it stretches the screen protector so it no longer fits.Luckily I bought the 2-pack. On my second attempt I followed the instructions. They were surprisingly helpful, showing how to do the most difficult step without screwing it up. Got it right this time.I love that this screen protector doesn't reduce the responsiveness of my touchscreen like many of the tempered glass ones, since this one flexes around the curved edges of the screen, unlike the rigid glass ones that don't match up perfectly to the curvature.And since the adhesive backing is super strong I've had no peeling at the edges, though I was careful not to touch the adhesive given the other reviews.Can't speak to how well it protects the screen as haven't dropped my phone since installing it.A couple other things I like: No smudging! Something about this material makes my phone look super clean all the time. Also I use the swipe keyboard and this material makes it very easy to swipe and do keyboard gestures. Not something I ever thought about until I tried this one and realized how good of a touchscreen feel it has.

So I have been very careful with my phone always and kept it with a screen protector, wanted to change the protector after a while and found this on amazon, when I was applying it on to my phone it was very very sticky which normally other protectors arent. And it came slightly over the home button. I was not happy and tried to remove it but when I peeled it off the home button it removed the paint from it and I was in a huge shock cuz it destroyed the whole look of my phone. I was hating myself at that point that why I even thought of applying a protector to my phone. I was trying to save it from a few scratches and here I am with a damaged home button.

Used the force to install this and fits and raps round well.The idea is you take the first layer of two off and apply leaving the second layer to hold which is only about 1cm deep.At this point it wasn’t 100% but managed to manipulate it to better position.You then take off the second layer and finish applying to the whole screen.There’s also a third top layer you take off last which is only there to keep film rigid when applying.Used the flattening tool and once third top layer is off push down the film round the curved edges.

Very effective screen cover. Little bit trick to get on, the screen needs to be perfectly clean. Then peel of the top inner protective layer from the screen protector and very carefully align the holes in this with the camera and speaker slots. Push down firm;y to get the air out, the alignment at this point is the key to success. When it is all aligned and the air out, peel of the larger protective layer and then very carefully roll on the protector from the top, taking care not to get any air bubbles included. By the time you reach the bottom the protector should be aligned with the home key and free of air bubbles.The protector i very scratch resistant and does not significantly reduce the sensitivity of the touch screen. Really good buy and very happy with it.

The screen cover for my phone was very difficult to put on. There are 2 covers and just as well there is! After trying to put the first cover on, you find the screen is covered in little air bubbles that are impossible to get out. After trying several times to get a perfectly fitted clear screen you are left with thumb, finger prints, creases, and trapped bubbles! I managed, eventually, to put the second one on my phone but I've still got loads of trapped bubbles! I have got to put up with it until my order for a different screen covering arrives! If you're thinking of getting this screen covering, think again!

I think I was just lucky getting this installed correctly the first time! It was easier than others I've used, especially on the curved edges. No bubbles, clear and responsive.***update a few weeks later*** it has started to peel on one of the edges. I am not too sure if this is because I have a backing case on it, but it's only on one side. Due to this, I have knocked a star off. It's a shame because it is a perfect fit.