Description
- CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected from oxydation. CS-FLUX is no clean flux and causes no corrosion if not cleaned, but if needed it can be cleaned very easily with alcohol. It causes no corossion on the PCB or components. KRYO33 has thermal conductivity > 13W/mK *. Thermal resistance < 0,004 K/W. KRYO33 is Ideal for over clocking since it is superior to any thermal paste originally used by manufacturers. Maximum possible thermal conductivity (for not electric conductive pastes). No curing time (system can be used immediately after application). Long service time (at least 8 years after application). K5-PRO has thermal conductivity K>5,3 W/m.K * (at least 3 times higher than common thermal pads that are used on computers and commercial electronics) .K5-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 250 degrees (Celsius) and has a long operational life time (practically infinite after the installation) K5-PRO is a high quality gummy thermal paste designed for use on memory chips and GPUs of various computers including iPhone, PS4, PS3, Apple iMac video boards. This is the only commercially available product at the moment that can replace the gummy thermal paste that is originally used by Apple. K5-PRO can replace soft thermal pads that are used on computers (up to 3mm thick) Computer Systems matterials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis, N. Karagiannis MSAIJ 2014)
Tech Essentials KIT K5 PRO KRYO33 3g, CS-Flux 5g, K5 PRO 10g Compatible with Apple iMac, Asus ROG, Acer Nitro, MSI laptops, RTX 3080, PS4, Nintendo Switch, Xbox, CSGR
