Valterra T01-0091VP Swivel Drain Connector - 90°, 1-1/2" x 3/4", Black

This works perfect on my grey water outlet. I broke my other one and needed to find a replacement and this is the one that fits this model. Price was reasonable so I bought two, one for backup.

Was a perfect fit

No more leakage fits tight very easy to install

Overall this works great and once installed correctly, did not leak at all. 5 stars for this, but -1 star for complete lack of installation instructions (not even a simple diagram).I needed to attach a hose to a temporary sink while my kitchen was being remodeled. I have repaired and/or installed several sinks and basically no what I am doing. When I took this out of the packaging, the gasket was tucked in between the nozzle and the cap, so I left it there. After about an hour of messing with teflon tape and wrenches, it still leaked. I grabbed some extra gaskets and tried using those, no joy. Finally, I realized that you need to take the whole thing apart, take the gasket out, and then put the nozzle back through the cap and put the gasket below the nozzle. A simple diagram on the packaging would have saved me a ton of time and effort.

if you don't have a lot of vertical space under your camper sink (who does?) this is super-handy to keep the drain near-horizontal on its way to the gray tank. I kept everything kink-free by buying a separate elbow to connect to the tank.

We used this for the gray water on our 2014 Aliner Classic. It does the job. A short piece of 3/4 hose and a barbed garden hose fitting puts the gray water right in the tank. If we don't have enough room for the hose, we just run it straight into the tank.

I have only used it one time so far but it works great on our pop up. Looking forward to using it for years to come.

When this drain connector first arrived, it looked like a good replacement part. However, when we tried to install it, the washer that you hand tighten was too shallow when the washer was in place. With out the washer, the threads would catch and twist on, but once the washer was in place, it was not deep enough for the threads to catch. We were able to use the piping part, but after about 15 mins of trying, we had to use the old nut. After that, it was fine.

Fit like a glove on my 2012 Rockwood Premier 2514G, and a word for all purchasers the rubber washer has to sit in the threaded area of the fitting 🤙🏻🤙🏻

First, let me say... Thank you!This fit our 2014 Flagstaff 206 MAC tent trailer perfectly! I attached a hose fitting with some tubing and I ran it into an empty container outside. Now we use the sink inside and just dump the container somewhere appropriate when it gets full. I love it.

Thread didn't match my 1/12 abs fitting

Average

I was searching for a product for my trailer's exit end of the sink hook ups to expel grey water away from the trailer and this was a great option as I took this and hooked a hose end to it and was able to use it to either dump into a bucket or woods and keep it away from the trailer and off the sides of the trailer as it ran out.