Illuminate Your Adventure! š
The Wiring Harness 2 Lead is a heavy-duty kit designed for seamless integration with various LED lights, offering a robust 200W load capacity and an extendable 8FT length. Equipped with a reliable ON/OFF switch and dual protection features, this harness ensures safety and convenience for all your lighting needs, making it perfect for ATVs, UTVs, boats, and trucks.
| Brand | AKD Part |
| Manufacturer | AKD Part |
| Part Number | 309004N |
| Item Weight | 10.8 ounces |
| Package Dimensions | 7.24 x 3.23 x 3.11 inches |
| Item model number | Light Bar Wiring Harness |
| Item Package Quantity | 1 |
| Material | Nylon |
| Included Components | Wire Kit w/ Switch & Blade & Fuse |
| Switch Style | Rocker Switch |
| Batteries Included? | No |
| Batteries Required? | No |
| Type of Bulb | LED |
T**T
Works so far, seems to be of quality but a couple of things to note
The main issue I'm having with the harness is that the cable lengths are setup to work in cars that have the battery on the left side of the engine bay AND you're okay with mounting the rocker switch somewhere to the left of the steering wheel. There's probably only 4 to 5 feet of total cable length from the leads that connect to the battery, to the rocker switch itself. Since my battery is on the passenger side of the engine bay, I'll have to add another 5 or 6 feet of cable to allow the rocker switch to route all the way to the center console where I want it mounted.Some finer points on the use of the harness. First, let me point out that I'm using this to run a stock radiator fan on an '05 GTO. (Since removing the AC compressor, the rad fans just run at 100% and I don't want that.) There are two fans in the radiator shroud and since each fan draws around 60-70 Amps at startup, then settle down to around 2 amps continuous, I am only going to connect to ONE fan (specifically the larger fan on the passenger side).This seems to be enough to keep the car cool and despite the 40 amp rating for the harness, it handled the 70 Amp initial spike just fine. I haven't tried plugging in both fans through the harness because I don't want to push my luck since I figure if the car is in such a situation where the one fan won't keep it cool enough I can just pull over and plug the stock wiring harness back into the fans and have them both run at full speed.
C**T
Nice setup
Harness work well with the fog lights I purchased, easy installation and long enough to mount lights on a jeep wrangler
D**S
easy to install
Nicely done with good protective covering on the wiring. Easy connection to my led lights with plenty of length for my application.
S**E
It's seems quality
It seems well made and should last. It's a basic on off switch sadly if I leave it on it'll drain my battery. I was hoping to have it connect to existing headlights like directions show and have it automatically shut off if I forget but mine had no way to connect into anything other than power, ground, switch and lights.
Trustpilot
4 days ago
1 month ago
