Zulkit Junction Box, Project Box IP65 Waterproof Outdoor Box ABS Plastic Electrical Boxes Electronic Enclosure Black 2.48 x 2.28 x 1.38 inch (63 x 58 x 35mm) (Pack of 2)

This project box is credible, however, it has standoffs in the bottom, two of which have threaded female brass inserts to accept machine screws. These are intended for use with a mounting plate so project builders can build components onto the plate outside of the box in the open and then simply screw the base down inside the box when they are done. If the vendor is not going to include the plate, they should at least offer it separately. In my case, I work with plastics and easily made a mounting plate of my own. I made all the cut outs in the box using a rotary cutter (rotozip) and found the ABS body to be much tougher than I expected. Zero issues with cracking despite some of the big holes I put in the box. Everything you see in the photo and video was purchased on Amazon including the ASPL lights, the Talentcell rechargeable battery, the power distribution and accessory unit, even the cable glands. All excellent Amazon products leading to an outstanding outcome. My Rize bicycle has never been the same. When cars approach my bike at night from the rear on lonely country roads they slow right down because they don't even realize it is an electric bicycle. The ASPL (Amazon) strobe emergency lights are so bright they even flash off the trees on both sides of the road.

I bought this to house a time delay relay to switch on an external hard drive 10 seconds after the computer is turned on. Solid case with a cover gasket. Very reasonable price.

Le quite una estrella porque están muy caras, pero la calidad esta buena.

Stainless screws in brass bushes, sealing strip easy to fit after carefully trimming to length. Robust plastic, suitable for use outdoors. Quite tricky to cut as it melts very easily; don't use an electric saw. Must be drilled slowly, too. Mine houses electronics on a motor-boat.

perfect for my motor control boxes