WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

Nice little Camera! Works great even with my extremely cheap goggles. Low latency and nice image quality.

Small little FPV camera, it works. I was able to hook it up immediately with my FPV lenses. It’s plug-in go I also printed a little case for it and it took no time at all. I do recommend recommend

the video quality is impressive for its price and size

Bought for small fixed wing rc planes, works better than expected+clear image for the price+easy to use=furthest range I tested at was about 100 yds, signal was still stable-gets pretty hot if it's turned on and not moving, stays cool while flying though-not great low light performance, picture starts to get a little underexposed about an hour before sunset

All in one review:Seller -- sold me exactly what I wanted, for what I thought was a decent price. Thanks.Package -- Nice package. The box was pretty, the camera was safely packed in foam and there was no damage to my package or camera when it arrived.Product -- This little camera does exactly what I wanted it to, so I'm happy with it. I've mounted it to a couple of nano quads with foam tape -- there were no issues with the camera.(Note: if you're building your own quad then you already have a plan to power your camera. If you're mounting it to a manufactured quad,and you don't want to solder your camera leads to your all-in-one mixer board, then you'll want to look for some pigtails (I can't find exactly what I bought, but it's kinda like this: https://www.amazon.com/Spektrum-Ultra-Harness-Single-Battery/dp/B00P7X4F60).Ultimately, at four grams, the camera is a little heavy for a tiny quad, but I haven't seen an [FPV camera/ TX] that weighs less than 4 grams.... I don't know what the range will be if installed on a larger quad, but I'm expecting it to drop out at distances over 50 meters. I've had no problems flying with it indoors.I haven't paired it with a headset. Instead, I tried it with a Virhuk 2" monitor (velcro'd to the controller) -- the image is fine.

Well that sucked i got my camera today went to set it up as soon as I plugged it in a short happened right there by the camera base im not saying they are all bad it's just my luck I got the bad one but I talked to the company and a replacement is on its way so next time maybe i can e joy this product 😁

This Wolfwhoop WT05 Micro AIO 600TVL camera works well. I paid $16.66 and have been happy, thus far. it weighs in at 3.5g. I soldered a JST 1.25mm connector on the top of the FC above the battery connector. Placing the cam on the FC of my Furibee F36 on a piece of foam that I cut from the cam packaging and a rubber band makes mounting/removing easy. This cam consumes 230ma and does get warm. It also requires a fair amount more throttle for the F36 to operate. I've tried the stock 31mm props, and the modded 2-blade props--with and without the camera; both scenarios are better with the 2-bladed prop setup. With 260ma batt, I get just over 3 minutes flight time with this cam as long as I'm not punching it and sagging the voltage towards the end of the run. Interestingly, I get the same 3 minute run time with the 220ma batts and better agility/performance due to the lighter weight--I guess 220ma are the sweet spot in terms of weight vs. mah. Picture quality is good, and distance is beyond my remote while using a small dipole antenna. The blue/red leds and the long/short push buttons are easy to use with this VTX. However, the manual that came with the WT05 lists 48 channels and how the leds correspond; but, doesn't list the combos for race channels. I use this while recording on my Galaxy S5 using and Eachine ROTG02.

Tested the camera when I opened the package and it worked, tested it the next day before installation and it turns on but only produces a black screen on both of my receivers