G276ARGB

Does exactly what it’s supposed to — no more GPU sag. The build quality feels solid, and the adjustable length and height make it easy to fit perfectly in my case. The built-in ARGB strip syncs nicely with my motherboard’s lighting for a clean, unified look. The installation was simple, and once in place, it feels rock-steady. Great mix of function and style.

I bought the basic no RGB version of this product, the just straight functional model. 100% worth it. It's made well, the finish is clean and appropriate. The adjustment support is well made, clearly made of steel, and the set screw is very easy to adjust. The adjustable support bracket has a WIDE range of support, which allowed me to get under a good spot on my GPU even with it's three large fans. Honestly worth the money. It's also mounted via three of the rear PCI Screws which means it's not going anywhere once you get the screws tightened. With having three screws as a mounting method, rather than two you get a lot of support out of the arm. If you're concerned about GPU sag, I highly recommend this product. I think you'll be more surprised about your purchase than you think. Only thing I'd be wary of, is if your case is made of a thinner more flexible gauge metal. This support brace likely will still give you the support needed, but it may transfer a fair amount of the weight into your case, it's theoretically possible it could slightly bend the case. I personally haven't seen it happen in any form as of yet for any case, but just be wary. Honestly you're not risking much trying this product.

I was worried it was going to look and feel cheap. Instead it feels super high quality and works exactly as expected. It bothered me that the card hung to the right a little bit and I read it could actually break the PCI ports. Its useful and looks good

I am not sure I received the same branded item that was sold to me. The box says UpHere on it but the actual bracket has some logo, no company name. It looks identical, but I have a feeling this bracket was sold to another company with their logo on it from the main manufacturer. No biggie, just feels a little sketchy like it's overstock from a company no longer around that UpHere grabbed up and is now selling under their Amazon store front. As far as the bracket goes: The good: - price is great for peace of mind on a heavy GPU - LED setup is easy and works well with RGB Fusion 2.0, no problems (LED is brighter than any other LEDs inside PC) - Sturdy enough for a MEDIUM weight GPU. (I have 2080ti and much more weight might be too much) - Good build quality (for price) - No broken or missing parts The bad: - limited weight for cards above 20 series GPUs (would not trust with a 4090 or 5090, etc...) - The riser the comes from the bracket that is holding the card does not stay very well unless you screw the screw very very tight, even then slightly more weight seems to push down on the riser - I had to adjust the bracket once installed by bending it slightly inwards to actually be under my GPU's edge properly (was easy to adjust/bend) And that is my review for this GPU bracket solid 4/5 stars and yes, I would recommend if you have a graphics card that is not very very heavy. My RTX 2080ti is a hybrid and has a waterblock on it adding to it's weight and I am not concerned about this bracket failing due to weight. If I purchased a newer and more powerful GPU I would likely not use this bracket for that, but maybe. I will update the review if anything else happens.

Easy to install, the riser does its job, but it looks amazing while doing it's job. That little added splash of ARGB is exactly what my case need to help those last little bit of missing aesthetics. I love the fact that it came with a jumper connection so it could still interface with the ARGB controller I have installed. Clean and seamless control through SignalRGB.

This Graphics Card anti-sag holder is amazing, and it also comes with RGB lighting. This support bracket is very well-made, and it is solid metal, furthermore it was very easy to install. I have the Lian LI O11 computer case with tempered three sided glass and the Asrock Radeon RX 9070 Steel legend graphics card installed, I was a little worried that the sag bracket would not be long enough or strong enough to hold up the weight of my graphics card. Let me just say this, I had no need to be worried, it worked perfectly in every aspect possible, and it met all of my needs for a graphics card support bracket. I love that it is all metal and that it also comes with RGB lighting and that it comes with a set of screws which was easy to install into the back of my pc slots. And I like that it is holding my graphics card in place with no sagging! Overall, I give this product a perfect 5 stars and I highly recommend it to others.

This took less than 5 mins to install. Looks great but the function of it is what’s great. Instant sag from my GPU gone

I bought this support to brace my 3-fan GPU in my King 95 Pro case, which has 3 fans integrated into the bottom of the case. It seemed like a good alternative to a post support. The good: simple design, nice RGB lighting with splitter cable, smaller screws than stock case screws to work with support bracket, 2 small foam pads to cushion the brace/GPU interface (see later). The less good: the brace sags vertically and sways laterally (this could be due to using only 2 of the 3 brace attachment screws, which were all that would fit my case/card combination). The two small foam pads shifted and came loose, and blew off the brace. I have found only one of them. I replaced them with a piece of electrical tape, which should be sufficient. In the end, I will keep the brace becasue I like the RGB and it is working well so far. However, I bought a post too. It fits between the bottom case fan and the motherboard - not ideal, but combined with the brace, I think it will be sufficient.

I bought this GPU bracket hoping to properly support my RTX 5070 in my Lian Li Lancool II case. Unfortunately, the left side where it attaches to the case is too bulky, which forces me to mount it one row lower. Doing this makes the adjustable part too short to reach the GPU, so it doesn’t really serve its purpose. I had to drill extra holes in my case to make it fit. Also, I’ve lost access to the three PCI slots below the GPU. On the bright side, it’s colorful and has lights, so it looks nice. Overall, it’s functional if you’re willing to modify your case, but the design could be much better.

Calidad precio, los materiales se sienten de buena calidad y cumple su función, además de que el rgb se puede sincronizar con la iluminación rgb de la tarjeta madre.

Ich habe mir die upHere ARGB-GPU-Halterung geholt, um das Durchhängen der Grafikkarte zu verhindern – und genau dafür ist sie top. Die Halterung macht einen stabilen, wertigen Eindruck, lässt sich gut in der Höhe einstellen und die Montage war bei mir unkompliziert. Optisch ist das ARGB ein schöner Bonus und wertet den Innenraum zusätzlich auf. Wichtig: Ich hatte sie zunächst mit einer KFA2 GeForce RTX 5080 EX Gamer 1-Click OC im Einsatz – hier hat alles perfekt gepasst. Danach musste ich die Karte wegen eines Defekts tauschen und bin auf eine Gigabyte GeForce RTX 5080 Gaming OC gewechselt. In meinem Gehäuse (ENDORFY ARX 700 ARGB) passt die Halterung damit leider nicht mehr, weil die Grafikkarte bei mir zu viel Platz an den Slots einnimmt. Das ist aus meiner Sicht kein „Fehler“ der Halterung, sondern eine Frage von GPU-/Gehäuse-Kombination und Platzverhältnissen. Deshalb trotzdem 5 Sterne – die Halterung erfüllt ihren Zweck sehr gut, man sollte nur vorher kurz prüfen, ob neben der GPU genug Raum vorhanden ist.

Cumple perfectamente con su función, manteniendo la tarjeta gráfica completamente horizontal, descargando el peso de la placa base, dado el peso y tamaño de esta tarjeta. Tiene suficientes efectos lumínicos para elegir. Como m placa base es MSi, este soporte funciona perfectamente con Mystic Light, trabajando conjuntamente con otros periféricos RGB de MSi. La parte del soporte que es ajustable y toca directamente la gráfica me ha venido justo, ya que subir mas este soporte, solo un punto mas, interfería con los ventiladores ya que quedaba pegado a la tarjeta. Me ha quedado bastante bien y estoy satisfecho con la compra. Lo recomiendo. Es vistoso, pero las imágenes no le hacen justicia.

Ottimo. Per build white e per essere tranquilli veramente un prodotto ben fatto. Consigliato