3/8&1/4 inch RO Tubing 1-3/4" Plastic Float Valve Shut Off Float Ball Float Switch to Auto-Fill Water Stock Tank,Bucket, Livestock Pool,Cattle Trough, Aquariums, Aquaculture, Water Reservoir

I hooked this up to the RO system under our sink. Now I never have to fill up the reservoir and easier maintenance since I’m using RO water and getting no calcium scaling. It’s been running for months now perfectly. There was some leaking issues first setting it up but that’s on me for not using pipe threading tape on the screw in nuts.

Hooked it up in my outdoor fountain and it works perfect. I would recommend this product to anyone who needs outdoor water leveling.

I used this to create an automatic refiller for my Keurig (B60). I ran a 1/4" blue pex line over from the back of the filter for the refrigerator (2 birds one stone). The float fit perfectly in the B60 reservoir. I used a step drill to create a hole in the lid, big enough for the threads, then I used a triangular file to put a notch in for the float.Make sure to use a generous amount wrapping Teflon tape on the threads to the elbow fitting. The first time I put about 3-4 wraps and it slowly dripped. The second time I doubled the amount of tape and carefully screwed it in (to prevent cross threading it) and it stopped slow drip.Use a small phillips screw driver to adjust the float. Keep in mind that the float cuts off at a certain level, but the water can slow down before cutting off. So start with a lower water level so that you can see where the water will creep to. In my B60 Keurig reservoir, it looked like it stopped at on point, but the next day it went 1/8" above the point. So I put tape on there and tracked it for 2 days and it only creeped up to the the 1/8" point. Each machine or setup will be different. I also installed a cutoff valve right before the float, that way when I'm out of town or we're not drinking coffee, I can cut the valve off for safety.

I followed a YouTube video and this thing worked! As advertised

I installed this in our Keurig about 2 months qgo and it still is doing excellent so far, no leaks and seems to shut off consistently. I like how this kit comes with a shut off valve.

These work great to shut down my ro/di system for my ato container. I bought one years ago and haven’t had an issue with it since. It has those push connectors for the hoses. I bought a second one for my salt water mixing container.

Works exactly as expected. Very nice that they included several adapters and is the main reason I purchased this one. The adapters alone would cost this much at a hardware store.Make sure you use Teflon tape wherever there's threads

The float submerged completed in water but the water still flows in

used to control the water level in a large humidifier