Anboo 1.25inch Flexible Crevice Tool for Vacuum Hoses Accepting 1 1/4"(32mm) inner Diameter Attachments 24.4inch

The media could not be loaded. It’s not perfect but for my needs and for $10 it’s a life saver. First a shop vac is preferred for this technique. Also a piece of 3/8” x 3/4” or shorter piece of wood or a stiff piece of metal to unclog it because IT WILL CLOG multiple times. This particular appliance has an issue with dryer lint and the lint filter. I have another long handled duster I use every time I dry so that it doesn’t damage the metal pieces on the right (I forget what they’re called). However I noticed recently (have had about 5 months) that the dryer filter wouldn’t seat properly. Got a flashlight. Found lots of packed lint. I used the to mainly get it sucked onto the top and then I would pull it out. It did get clogged with smaller pieces that got sucked in.I also used the stick to loosen the packed lint so maybe a metal stick would work also but I wouldn’t want to damage anything so would use a wood piece to poke it loose and then the vacuum to pull it out.It’s frustrating but GE kind of messed up on this appliance. It’s not what it could be. I’ve spent several hours looking into what would work and have tried other hoses that were too thick but also, at that time, I didn’t know this lint was packing up on the left side. I only saw it on the right coils, which are quite fragile.

Purchased this crevice tool to reach the tight spaces around and under car seats. It does a great job in cars and has been used to clean out the dryer vent. Only negative is it comes coiled up and really never fully straightens. Help full hint: Don't try to suck up large items it may clog the tool and reduce the suction. If this happens use a wire or thin object to clear the item.

Bought to vacuum leaves out of my car grille. Regular attachments too short. This reaches and works just fine. Some complained about folded shape of tool when packaged. Laid it in sun for few hours and it relaxed to straight, no problem.

I bought this to clean out they hard to reach area behind the lint trap in our clothes dryer. It works but clogs very easily. The middle of the attachment is a soft rubber but both ends are molded plastic. There is a lip where the tip meats the flexible rubber so things collect and clog there. It is easy enough to reverse the attachment into the vacuums hose to clear the clog.The other part that is a little annoying is the attachment was shipped folded in half so it had a bad memory. This was easy to resolve by pouring hot water onto the rubber then straightening it. After it was straight a little cold water cooled it to keep it straight.

Needed something long, narrow and flexible to clean out the lint trap on my clothes dryer. The narrow attachments on the carpet vacs werent flexible and the carpet vacs werent powerful enough to pull all of the lint, durt and rocks out of the trap. This fit my shopvac and fit into the slot. Worked like a champ

Is it flexible? Yes. Does it actually work? NO. It's a very thin rubber crevice tool, with a plastic insert at either end. One side has the plastic piece that slides into the rubber tube and attaches to the vacuum, the other side is like a plastic end cap. Both are removable and re-insertable with some concerted wiggling and flexing. The problem is, rather than the rubber tube sliding IN to the plastic caps, the plastic caps slide IN to the rubber, thus drastically reducing the internal diameter of an already very small internal diameter, and on the vacuum side, debris catches gets caught and stuck between the rubber and the plastic insert, and it clogs up almost instantly. The diameter of the the thing is so narrow that my modest 6 hp 4 gallon Harbor Freight shop vac screams with strain trying to suck air through it, and if I vacuum anything larger than dust particles, such as little bits of leaf or organic debris or dirt typical of what you find on the floor of a car, it clogs up within a matter of seconds. It's too narrow. It doesn't work. I'm returning it.

Length is great, flexible, but don’t fit into hose very good. Im trying to vacuum and it keeps coming out of end of hose. Aggravating!!!Needs more length into hose for stability.

This attachment comes with a permanent bend in it. However, it’s very flexible; thus, very easy to manually straighten during use. I like it. It is very useful for vacuuming tight spots. I use it to clean out the lint that builds up beneath our drier lint screen.