Marantec D323-868 compatible CLONE remote control replacement transmitter, 868.3Mhz fixed code clone!!!

Description

This is a high quality 868.3Mhz clone remote, that clones your MARANTEC D302-868, D302-868, D313-868, D321-868, D323-868, COMMAND 131 remote controls. Parameters: 868.3Mhz frequency• battery and keychain included• High quality CLONE remote!!! HOW TO CLONE YOUR REMOTE: • You need to erase the remote first : 1) Press and hold LOCK and UNLOCK buttons together - Led will flash 3 times 2) Keep holding LOCK button, press UNLOCK button 3 times, Led will start flashing Non-Stop. The clone remote is clear and ready for cloning. Next you need to clone your original remote : 1) Put both remotes Into back to Back position (II). Make sure they have direct contact , touching each other. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Keep pressing until led will make : 2 blinks > 3 blinks > Steady = Successfully cloned, only after the light goes into steady. • If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please slide the remote slowly up and down, very slowly until you get the point where it will go through. Side-by Side PROGRAMMING VIDEO: https://www.youtube.com/watch?v=JVcNcQ8abC8 • Back-to Back PROGRAMMING VIDEO: https://www.youtube.com/watch?v=n0-QgtmCWJI Note: you don't need an access to you control board or receiver!!! If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www..com/dp/B01MZYAPVN . IF YOU HAVE ANY QUESTIONS ABOUT YOUR PURCHASE PLEASE CONTACT US!