2 Pcs Sneeze Guard Clamp, Bracket Sneeze Guard Shield Base for Countertops, Stick On Heavy Duty Auminum Partition Guard Clamp, Panel Support Clamp Stand for Clear Desktop Counter Reception

I know these were designed for plexiglass panels, but I used them to hold my Bulldog's inside pen on porcelain floors. Very Strong!

These worked by supporting 5 feet by 3 feet by 1 inch piece of card board. The card board was thicker than what could be support with included screws. I tried it with my own1.5 inch screws and it still worked!!!!

These worked pretty well for my purposes - holding up a corrugated plastic sign - but didn't clamp tightly on the sign. Could be user error (one tightened more than the other), but I'm not sure this would work for something thin. Overall, they held up well and kept things balanced.

East’s to assemble is durable.

The rubber grommets just haven't wanted to stay or lay in place. The Allen wrench was junk, I had to use my own. It keeps coming loose from the plexy glass I have placed inside them. If there is any heat involved under them, the rubber inserts become to soft, and then the contact points to the plexy glass become loose.

Sneeze Guard Clamp worked very well on 1/4" plexiglass shield.

I love the look and weight of the clamps. They really do hold up weight and height of large plexiglass shields.

In the end I got it to work for my needs but needed a lot of modification. One of the screws for tightening the clamp together is bottoming out way too early, and the clamp does not close all the way as a result. I suspect that the screw hole was machined improperly

1 support à bord arrondi et l'autre non. Les trous pour les fixations des pinces ne sont pas au même endroit dans les 2 supports d'où le décalage des pinces.

Sturdy, support an acrylic divider screen well.

Belli, robusti e resistenti. Li ho usati per sostenere un pannello in vetro temperato da 6 mm 100×67. Avevo letto una recensione negativa perché non stringevano. Stringono benissimo, basta saper scegliere i bulloni adatti allo spessore del pannello da stringere. Raccomando a chi confeziona questo articolo di mettere nella confezione due bulloni lunghi per spessori grandi e due più corti per spessori piccoli. Nella mia confezione vi erano tre lunghi ed uno corto, pertanto un morsetto non stringeva il pannello da 6 mm. Ho dovuto accorciarlo e tutto è andato alla perfezione.

Staffe di design, molto eleganti sulla scrivania in ufficio, solide e reggono bene il peso di un parafiato di 80x60 spesso 3 mm.

Brilliant for creating a screen or as in our case, a Dog Guard. We have used these before to make Guards to keep our dogs in different parts of the house safely. Attached to a sheet of painted plywood with handle cut out. Simple yet sturdy!!!