C.JET TOOL5 Pack Tack Lifter, Nail Puller, Upholstery Staple Remover, Rivet Removal Tool, Tack Puller, Screwdriver for Furniture

In the past there have been many times when I have struggled trying to remove deep staples and tacks from wood and board using a pair of pliers or a claw hammer only to make a real mess of the surface before the item is finally removed. When I saw this tool set, it looked ideal for the job so I ordered it ready for when next I need to remove such items.This set comes with five different sized pry bars with different ends to cope with all types of staples, tacks and U shaped nails. Along with these comes an impact handle and a strong fabric bag to keep them all safely in one place.Each of the items is made to a high standard and look to be strong and sturdy. I used one of the forked shaped pry bars to remove a large staple from a wooden plank as a test and after putting a good bit of weight onto the bar, it removed the staple without bending or even flexing the bar. I tried the same thing but with a U nail which was deeply set inside a hardwood pole but this time I couldn't remove it by pushing on the bar, so I attached the correct bar to the impact wrench and after a few good whacks with a hammer the nail lifted and I could then get a good purchase to pry it out the rest of the way. Again there was no damage at all to any of the tools except for a slight mark left by the hammer which was to be expected after the way I hit it, lol.I don't work in the sort of job where this is needed but I see no reason why this can't be used in a professional manner and should last as any good quality tool would. For me this set is ideal for when I do need to lever small objects out of surfaces as they save time and also stop the usual injuries that I end up with when trying to do the job with the wrong tools, lol.Great quality and versatile tools.Recommended.

This lifting set comes in a printed cardboard box and inside you’ll find the lifter set with a user guide. This pry bar kit comes in a lovely storage pouch which is held closed with a thick Velcro strip. Opening it up and you are presented with the pry tools all nicely laid out and secured with an elasticated hoop. The driver is also secured next to them and it’s all neat and tidy inside the storage pouch. The pry bars themselves are quite strong and they held up well with everything I tried them with. The driver has a bit already installed which can take standard screwdriver bit s so it can also be used as a screwdriver. To use the pry bar bits then you must remove the screwdriver holder from the driver and then the pry bars can be installed. The driver has a locking mechanism where it locks the bits in place, so you have to pull the shank down to release them. Quite handy so the bits don’t fall out when it’s held upside down. The tip of the screwdriver has a metal head so is made to be hit with a hammer and not damage the driver itself. This can come in handy for when using it as a prise bar or for chipping away at surfaces. The storage pouch also has an additional storage pouch inside so you can store other bits like screwdriver bits and anything else that comes in handy. Overall, this is a very handy kit to have as it contains numerous prise bars which are specifically for different situations and it’s all contained in a nice storage pouch.

This is a quality tool with a number of uses, I already tried pulling a nail out but it was a big nail and in way to deep for this to get enough leverage to get it to move, however it did have the advantage that I can hit it with a hammer to get the nail puller attachment under the nail but to no avail would it pull it out, smaller nails and this whips them out easy, other uses such as removing staples, clips etc this can deal with at ease, comes in a rather nice tough pouch.The problem I have with it is really the price, there are a lot more cheaper tools to do the job, £40 at time of review would be way more than I would consider paying for a tool like this as like I said a claw hammer and a screwdriver will do some of what this can do and a trim remover tool cost a few pounds, but that's the only negative for me as it's a nice tool overall.

Well, who knew a kit like this existed? It’s a fascinating little kitbag packed with pieces and I’ve yet to fully understand it’s full capability. It’s ingenious.I have an old chair with metal studs and I want to remove the studs so I can replace a piece of damaged leather. Easier said than done as I don’t want to destroy the leather or the wood frame. I’ve tried a few screwdrivers but they were all too big and of the ones with a smaller head, the handle was too short and light to give leverage. This gadget does the job with ease; there’s a fitment cleverly designed to slip under the metal head and the handle is sturdy enough to give the right leverage to lift it without much effort. Magic.There are numerous different heads and some seem designed to fit with drill bits. Everything is neatly stored in a quality pouch, so they’re all kept together. The handle is comfortable to hold and is designed to withstand being hammered if required. It’s a brilliant set and a very wrlcome addition to any toolkit.

The built quality is undoubtedly great of this C.JET Lifter tool. The material is strong well made appears to be of decent quality.However, in my opinion, do you need to spend £40 ( on 29/05/2022) for this kit? It's a bit of a overprice for what it is. I believe the price will adjust over the coming weeks.There are many hacks that traditional tools can do it. For example, if you want to remove the nail, use a plier, the chuck of your drill machine, or the claw hammer.For rivets and staples, you can use a flat screwdriver with the support of another screwdriver.This could be useful if you want to hammer something; however, I use a flat small chisel or old screwdriver.I ordered this because I had never used this kind of tool before and was curious if this would be helpful in my DIY projects, but this does not prove as practical an idea as I had first thought. I can work around it without this tool too. If the cost is nearly half of the current, keep this as a spare tool, but I don't consider this a necessary tool for my tool bag.I hope this review helps you to make a purchasing decision.

Nice set of interchangeable prying tools for about the same money as one or two from the other guys. Very high quality

I inherited several over 100-year-old antique chairs and sofas that are in excellent condition but needed springs restrung, restuffed, and new fabric. I couldn’t find anyone that could add the modern touches and maintain the integrity of the antiques, so I decided to tackle the refinishing/reupholstering myself. The biggest challenge is removing SO many staples and antique nails without harming the very old wood, so it took me weeks, more maneuvering and strength than I expected, and left my hands aching for days. Being female and having little experience with tools, I didn’t realize that there were better options for removing the staples, so I’m kicking myself for not finding this sooner, but relieved to have it now for the 2 other big restoration projects I was dreading due to the staples. This set has a comfortable, strikable handle with strong, interchangeable remover tips in a good range of sizes. The parts interchange easily and quickly with a press-spring coupler in the handle. It also comes with a ¼” bit adapter so the handle could be used with additional parts. The strong canvas storage bag includes an extra Velcro-enclosed pocket.*** Helpful? I rely on customer reviews for all my online purchases, so I hope so! ***

釘やリベットなど様々なものを剥がす時に役立ちます。5種類のバールがあるため使用用途によって使い分けが出来て便利です。作りもしっかりしており曲がったりすること無く使えました。ケースが付属しているため収納も簡単です。高機能で使いやすいおすすめの商品です。

The C.JET TOOL 5 Packs Tack Lifter 3 mm U Tip Nail Staple Rivet Tack Puller Screwdriver Upholstery Staple Remover Tool for Furniture is exactly as advertised. It has a nice selection of tips that lock into the handle for various screw, tack, nail, and staple removal. I find the tool to be useful for small jobs around the home that need more precision than a screwdriver or pliers.I love the sturdy bag that keeps everything tidy, organized and together.What I don’t like is the price. $40 (at the time of my order) is fairly steep for a hobbyist or do it yourselfer. If I were a professional furniture renovator, it might be worth the price. It is definitely a quality set but, for no more than I would use it, the price is just too much.

必要なものは全て揃っており、性能も十分なレベルなので満足しています！ハンドルへのバールセットの取り付けは非常に簡単ですし、力を入れて使用しても外れたり何らかのトラブルが発生することもありません。ハンドルの大きさ、手元のラバーも手のひらへの馴染みが良く、操作しやすいです。専用の収納袋はかなり厚みがあり、頑丈なので荒く扱っても問題なく、とても使用しやすいです！簡易ではありますが取り扱い説明書も付いているので、安心です！