YSSHUI 400 x 300mm DIY PC Case Dust Mesh Filter, 2Pack PVC Dustproof Mesh Filter Cover with Magnetic Strip for Computer PC Case

Used for putting filters on a PC case. The material is flexible, not brittle and easy to handle. The mesh is not very tight, but still sufficient to prevent dust accumulation inside the PC. The adhesive magbetic strips are also good and easy to install.

This products durability is quite lacking and the included magnets don’t even work. For the price they are definitely not worth it.

Good

well worth the money very good quality very versatile easy to work with thanks

So, bought a case that was almost perfect... But you guessed it, it was missing any form of dust filtering from it's main front intake, ridiculous oversight if you ask me. But fun case otherwise, so went with this kit. Even slapping bits and pieces together (case was slightly longer than the max length of the mesh pieces) was p1ss easy. I even managed to cut it to size with a regular pair of scissors. Supplied magnetic bits are more than adequate to safely stick it to the front of any ferro metal front. Just know it has to adhere directly to metal, any form of plastic in between will be enough for these magnets to loose adhesion. So, good stuff, easy to clean as well. Tip: have a good look at which side is the smoothest and make sure that that points outwards, easier with cleaning the filter

I recently built a new PC for my son after his mini PC failed suddenly. I wanted to go with a full sized ATX build, as I usually make for myself, and picked a Lian Li Lancool 207 case. After building the system in the case, I realized that the air intake meshes were great for airflow but also great at letting dust in. I have previously made DIY magnetic filters for my Phanteks P500A case when the same situation faced me a few years back, so I looked at my options and selected this one largely on the basis of good price with a good review average. I am pleased to say it was a great choice. I had no trouble making intake filters for all of the meshes on this case. There's one particularly unprotected air intake which has very large hexagonal gaps the same size used for the rear air outflow, and I think covering that one is actually pretty important if you don't want a lot of dust coming in where SATA drives are, blowing right up into your video card through the horizontally mounted fans (you know what hates dust? horizontally mounted fans, really hard on their bearings over time as lubrication distribution is harder for them than vertically mounted fans). Please view the attached photos so you can see what I mean when I said there's plenty of materials to make all the filters you need for a case with modern airflow. Speaking of, they do reduce airflow somewhat compared to unimpeded bigger gaps, but if you're in a modern case you should still have very good airflow. I've used something exactly like this for years on my P500A case with a 12900K and it has never caused temperature issues, despite covering the entire front intake mesh so I reckon it's going to be a winner for keeping the interior clear of dust (which tends to help keep air moving nicely, you know?)

Material de boa qualidade e de facil manuseio, recomendo!

NZXT H510i kasam için aldım, kendim ön panel boyutunda kestim. Çevresine de manyetik bant yapıştırdım orijinal gibi oldu. Cam yerine bunu takmış oldum böylece kasa hava alabildi sonunda.