Molblly Queen Bed Frame with Headboard

Parts are all stored in the headboard upon opening the package so there is the slightest extra cushion upon opening the box (clever). It is hollow and is fabric glued onto the square headboard frame.Good quality- they give extra screws and the L wrench and everything was simple to install. Make sure to install the screws loosely until all parts are together then tighten them, or else the screw holes may not align. The wood was also easy to slide into place and the bed doesn’t wobble or squeak with an 8 inch memory foam mattress. Note the frame is light - I did put felt pads on the bottom so it slides easily, beware if you do the same. The middle part clicked down into place upon laying on my mattress for the first time. Headboard does wobble if I try to shake it but became better after tightening the inside screws (might have missed it the first time, not sure if i missed another).Tldr solid bedframe, looks like the photos, light and easy to assemble. Headboard does wobble when I shook it intentionally but may be expected since it’s light.

Sometimes upholstery frames like this stink to high heavens, but the one I got only had a faint smell to it. I let it sit out in the living room for a couple days since my mattress had to air up anyway and it was fine. Make sure to air out the slats too.Does not creak or make loud noise when you lay on it, so celibacy not required for this frame.The instructions were pretty good and things were easy to figure out. I would allocate a couple hours to putting it together though. Comes with two Allen keys and both sides are identical, so two people could knock this out extremely fastPay attention to where holes are facing in the diagram.Does not use Velcro for the slats but they are spaced for you. Putting the slats into the holders can get tiny wood splinters on the floor though so maybe do that step outside and carry them in, or do it on hardwood floor for easy cleaningYou get some extra screws in case you strip them, if you are prone to that.Bought this on a Amazon sale and I would say it was a good purchase, I'd get this one again if I needed another one

I bought this frame looking for a compromise between stylish and sturdy, and hit the nail on the head! This frame is NOT difficult to assemble at all, and I was able to follow the instructions from start to finish without a hitch. The slats and frame are super sturdy and completely silent; and as a heavier person I was worried that it wouldn’t hold up, but I feel completely safe and supported with the frame. Right out of the package it definitely had a strong “factory smell” to start, and I saw some reviews where others had an issue with it lingering about, but my frame completely aired out after a couple hours. All in all, I can’t say enough good things about this frame! It’s a great buy!

I love the look of this bed frame. The headboard is unique and it looks great. It is much nicer than one I got on Wayfair for twice the price! Everything was clearly marked and it was very easy to put together—did it by myself. The only downside is the mattress I got for it from the same company in supposedly the same size is a couple inches too big for the frame so it hangs off the end of the frame (it’s too tall to fit under the headboard and doesn’t seem to be a way to adjust the height). It’s for a guest room so it won’t get a lot of use so hopefully it will be okay because I love the frame and it would be a hassle to have to return everything (not sure if the problem is the frame or the mattress).

Probably the worst bed frame I’ve purchased. First off it takes forever to assemble, each wooden slat has to be inserted individually, other frames have the wooden slats that can be easily rolled out. Second it smells terrible. I’ve been using it for 3 months now and the smell still hasn’t gone away despite the instructions saying that it should air out within a couple of days. Worst of all it’s pretty wobbly. I’ve assembled a few other beds and furniture in the past and they all came out fine. This one is shaky no matter how much I seem to tighten the screws. Not worth it imo, looks cheap, too many prices to assemble and smells bad. Look elsewhere, there are much better options on Amazon.

I bought this bed on a hope and a prayer because there were no reviews. Just got finished putting it together, so thought I'd write one for folks who may be hesitant.The bed came in one box that was damaged, but thankfully things were packed well enough inside that the bed itself was fine. The hardware comes in a small box and the other pieces are inside the headboard, accessed by a zipper. The parts were clearly marked with letters that correspond to steps in the directions.As for the directions, follow the one about not tightening things too much. If you do you'll have trouble lining up the holes and getting screws in, but if you leave them loose everything will match up perfectly. Once I got done with a section that didn't connect to others I tightened the screws. Also pay close attention to the side rails and where the holes are in the pictures. It could be easy to install one of them upside down if you're not paying attention. I was a little shocked putting the slats on in the final step - everything lined up perfectly. Thought for sure I'd have to adjust some things, but thankfully I was wrong.The bed looks exactly like the pictures and feels very sturdy. It doesn't make any noise when sitting on it and was easy to move a couple feet after assembly (without the mattress). From unboxing to finished assembly it took me about an hour and a half to do it by myself. It would probably go much faster with two people, but it's totally doable by yourself.Very pleased with this purchase!