Kuryakyn 9642 Motorcycle Foot Control: Girder Extended Brake Pedal for 2014-19 Harley-Davidson Touring & Trike Motorcycles Without Fairing Lowers, Chrome

Well made , easy install and MUCH more comfortable pedal angle as opposed to oem pedal.

Very easy to install.I just removed the floorboard (two bolts) removed the master cylinder (another two bolts) and slide it slightly forward to maneuver the pedal. Take out the old pedal, installed the new one replaced the master cilinder and floorboard and that's it. The cotter pin is a little difficult to install but not a big deal. Now I can press the brake pedal without moving up my leg. Really good clearance. I installed it in my 2014 ultra limited and looks awesome. Great chrome quality.

I highly recommend this extended pedal with floorboard extensions. The combination allows the rider's entire boot to be on the floorboard and is much more comfortable. Installation required removing the crash bar/engine guard on my '20 Road Glide, not too difficult there but was a little tricky working around the exhaust <without removing> but totally doable. Job time was about 45 minutes for the pedal and floorboard extensions and I am very satisfied with the result. Using the rear brake is a little different with the angle of the pedal being flatter <towards horizontal> and requires a little more foot movement but really its such an improvement. This is how it should come stock.The pedal should include a new cotter pin but does not.All in all, this has greatly increased my ride comfort and experience.

Fits perfectly on my 2022 Road Glide. The chrome is perfect and it looks awesome! Moves the break pedal out and down, much better than stock. Im 6-1 so this is needed for comfort! Get one!!

Looks great and fits well. Easy to install. Size is a bit more than desired for me even with a 13 boot. They are maybe about a1/2-3/4 too long. Might take some getting used to.

Not difficult to install. It is just what I expected. It lowered the brake pedal, which was exactly what I wanted

Installing it on my 2015 RG was tricky as I have the Chopped engine guard. It went on after I removed the exhaust heat shield. Very well made and dramatic improvement from stock.

Ready to install out of the box, just tighten grease fitting, add a little grease and drops right in. I have ran a few of these and every time you get on the back brake you’ll be glad you bought this product. I also run lowers in the winter and works perfectly with them installed.

The media could not be loaded.  My wife bought me this for Xmas. I have longer legs and needed a more practical fitted break pedal. Very sturdy made.

Well made..looks good and is a much better length than "stock" as I,m 6'2"

Excelente producto