VR CoverFitness Facial Interface Bracket & Foam Comfort Replacement with Lens Protector Cover for Oculus/Meta Quest 2 (Dark Blue & Black + Comfort Foam)

SYNOPSISMy review focuses primarily on the ventilated faceguard attachment included in this kit. I live in the hot and humid American South, and the ambient moisture means that my Quest 2 headset is even more prone to fogging than usual. The faceguard alone is an absolute must-buy if your headset lenses tend to fog up. WITH PROPER SEATING* of the headset, the ventilated spacer has eradicated fogging entirely -- even with vigorous fitness sessions, my lenses stay crystal clear for over an hour.*PROPER SEATING: the headset should not closely hug your face. The straps on the headset should be loose enough for the headset to be easily removed without loosening the straps. One reason lenses are prone to fogging is lack of airflow, and forming too tight a seal between your face and the faceguard will inevitably lead to fogging -- even with the ventilated faceguard. But when I wear my headset appropriately, this ventilated faceguard entirely eliminates fogging of the lenses.DETAILEDDifficulty Level - How Hard Was This To Use?[_] Beginner[_] Novice[x] Competent[_] Advanced[_] ExpertYou will need to feel comfortable pushing the plastic pieces into the Quest headset, with firm enough pressure to secure attachment but without so much force that you risk damaging either the headset or the attachment. The adhesive comfort pads require careful alignment with the faceguard to properly attach, and a mistake would be expensive. You should have steady hands and/or patience when attaching the comfort pad. And the comfort pad is an immense improvement over the silicone padding currently shipped with the Quest 2.Build Quality[_] This felt very poorly designed, and I recommend against buying it.[_] This felt poorly designed, but "your mileage may vary."[_] This felt like it was adequately designed, with no big pros or cons.[_] This felt like it was well designed, with more pros than alternatives.[x] This felt like it was excellently designed, and I recommend buying it.The Quest 2 factory faceguard is very poorly designed. This ventilated replacement is an obvious design improvement with no clear drawbacks.Build Materials[_] This felt like it was made of different materials than promised, and I warn against it.[_] This felt like it was made of very cheap materials, and I would not recommend it.[_] This felt like it was made of the promised materials, with no big pros or cons.[x] This felt like it was made of higher quality materials, with more pros than alternatives.[_] This felt like it was made of premium materials, and I recommend buying it.Every item in this kit feels above-average in quality. Nothing feels truly "premium," but for the price I wouldn't expect it.Build Safety[_] This felt very unsafe to use, and I recommend against buying it.[_] This felt a little unsafe to use, but "your mileage may vary."[_] This felt safe enough to use, but nothing to write home about.[_] This felt safe to use, with better performance than alternatives.[x] This felt very safe to use, and I recommend buying itThe ventilated faceguard may quite literally improve the safety of using the Quest 2 headset. It certainly feels AS safe as the manufacturer's component which this replaces.Functionality[_] This did not do what it promised, and I recommend against buying it.[_] This did what it promised, but very badly.[_] This did what it promised, but it was "just fine."[_] This did what it promised, and did it better than alternatives.[x] This did what it promised, with distinction, and I recommend buying it.My rating here is provisional -- I have not tried alternatives, so I cannot compare them to alternatives. However, this has delivered a great value for the price approximately one month in.

I wear glasses and my IPD setting on the Quest is a 3. The stock interface with silicone, I would have to “wedge” my face/glasses in there and carefully remove the headset as it would firmly pull off my glasses every single time. If playing any sort of movement involved game, you get hot over time and sweaty. I would have to pull the elastic stock headband forward and blow cool air up to get the fog on my glasses to clear, but even then, would come back right away unless I took a 30 minute break (who wants to do that?!?)This VR Cover interface takes care of that problem. I can play rounds of Thrill of The Fight, be drenched in sweat, but have clear glasses!! This does nothing to cool your face, so don’t expect that, but it will keep you fog-free. No issues with sweat getting into the interface. I used the minimal foam and it no longer holds a death grip on my face/glasses. Can pull the headset off without it taking off my glasses. Other thing that is very helpful if you have a round face like me, the side wings of the plastic is soft, so kind of molds to your face.My only con is the very slight amount of light that does come in through the vents at certain head movements. It’s so minimal and only if you turn your head at such a slight angle that the no fog tradeoff is absolutely worth it. I have zero issues with my face shape with light bleed by my nose. I barely tilt my Quest down when it’s on and I get no light through there. I took the removable nose piece off because of this, and it does NOT work with glasses. At least with thick frames, it rides up the glass itself unless you snake a finger in there and work it under the bottom the glasses. If I didn’t wear glasses, I would say the nose piece was comfortable and probably be preferred. But if you are reading this and wear glasses, just take it off and throw in the box.I used the XL spacer with minimal foam and my glasses do not touch the VR lenses. I did not try with the stock Meta spacer. It connected so firmly with the XL spacer and the headset, that I do not want to pull apart and not get as good a connection. No rattle. I do think my eyes are closer and Field of View is clearer than before. The standard foam was just too thick and caused the interface to grab my glasses.I was expected a cheap pleather material, but this is some smooth material that is extremely soft to touch. The minimal foam still has creases when it’s on there, but I have not noticed anything on my face after longer play sessions.Overall, this is THE facial interface to buy. I also bought another on Amazon that came with a Lycra and mesh pads that were curved padding. The pictures for that one looked nice, but when it was delivered it just looked and felt cheap. If you wear glasses, this one works perfect and gives you a little more room in the interface. You will still sweat like crazy for some games, but your glasses remain clear. Buy this one, don’t bother with the other cheap stuff.

Son demasiado cómodos los recomiendo

Är riktigt nöjd överlag med allt.

W połączeniu z jakimś paskiem typu Halo polecam używać najcieńszej osłonki, ponieważ zwiększa ona pole widzę i jeszcze lepiej się gra

J'ai récemment acheté le kit VR Cover Fitness Facial Interface and Foam pour mon Oculus/Meta Quest 2 en couleur Dark Grey & Black, et je suis extrêmement satisfait de ses performances, notamment en réduisant considérablement l'apparition de buée.La première chose qui m'a impressionné est la qualité de conception de cette interface faciale et du rembourrage. Le choix de couleurs Dark Grey & Black donne à mon casque un aspect élégant et raffiné, lui conférant une allure haut de gamme. Les matériaux utilisés sont doux, durables et résistants à la transpiration, ce qui en fait un choix parfait pour les séances d'entraînement intenses. Je n'ai plus à m'inquiéter de la transpiration qui imbibe le rembourrage d'origine et le rend inconfortable.En plus de son apparence, ce kit a grandement amélioré mon expérience de réalité virtuelle en réduisant considérablement l'apparition de buée sur les lentilles. La conception de l'interface faciale assure une meilleure circulation de l'air, aidant à évacuer la chaleur et l'humidité. Cela signifie que je peux profiter de mes sessions de jeu ou d'entraînement sans être constamment gêné par de la buée qui obstrue ma vision. La clarté visuelle est nettement améliorée grâce à cette solution, ce qui rend l'expérience plus immersive et agréable.L'installation du kit est simple et rapide. Les coussinets de mousse sont faciles à retirer et à remplacer par les nouveaux. De plus, ils s'adaptent parfaitement à l'Oculus/Meta Quest 2, offrant un ajustement confortable et sécurisé. Le nettoyage du kit est également facile, ce qui permet de le maintenir en bon état et d'assurer une hygiène optimale.En résumé, le kit VR Cover Fitness Facial Interface and Foam pour l'Oculus/Meta Quest 2 en couleur Dark Grey & Black est un excellent investissement pour tous les utilisateurs cherchant à améliorer leur expérience VR. En plus d'apporter un style premium, il réduit efficacement l'apparition de buée, offrant ainsi une vision claire et dégagée. Je recommande vivement ce kit à tous les propriétaires d'Oculus/Meta Quest 2 qui souhaitent un confort optimal lors de leurs séances de jeu ou d'entraînement en réalité virtuelle.

Cambiar el facial de las Quest 2 no es algo esencial pero si recomendable, el producto de VRCover ofrece un buen ajuste evitando en gran medida la entrada de luz externa.Dispone de dos almohadillas de imitación cuero rellenas de foam cada una de ellas con un grosor distinto que nos aporta mayor comodidad si usamos la gruesa o algo mas de fov si nos decidimos por la que es más fina.También incluye un protector para las lentes que esto si que considero que se debería tener por que nos puede evitar que se dañen.Por último incluye una gamuza como las de las gafas de buena calidad para limpiar las lentes.Añadir que en mi caso recibí el producto con la goma nasal deteriorada y VRCover me solucionó el problema rápidamente, así que un 10 a la atención al cliente.