The Halo by SFF Noir. The Halo is an RGB button designed to be compatible with PC. It features 19cm (7.5”) cables leading to a 2-pin power switch connector and 4-pin RGB connector. Included with every Halo are 30cm (11.8”) 2-pin and 4-pin extension cables that extend the effective length of the wires to approximately 500cm. Please verify that your motherboard has an available 4-pin RGB port prior to purchase (NOTE: NOT 3-pin Addressable LED port). The package also includes an o-ring that can be placed on the interior of the case between the case wall and the tightening nut to prevent scratches on the case and prevent the nut from backing out. The RGB LED is controlled by software provided by your motherboard’s manufacturer, or possibly by available third party software. Software is not provided. Installation: 1) Utilizing the correct diameter button, unscrew the tightening nut from the back of the button. 2) Pull the wires and button through to the inside of the case, 3) Place the provided O-ring over the threaded rear of the button against the PC case, 4) Screw the tightening nut against the o-ring/case, 5) Connect the 2-pin Power Switch cable to the corresponding port on your motherboard, 6) Connect the 4-pin RGB cable t other corresponding port on your motherboard, 7) Download the software provided by your motherboard manufacturer for controlling the RGB ports and select the desired color. Please utilize your motherboard’s manual to identify the correct 4-pin RGB and 2-pin Power Switch ports.
Trustpilot
2 weeks ago
2 days ago