Medium Aluminum, Cooper, Brass&Plastics Cutting Saw Blade

I've cut 1/4 inch aluminum with a 12in chop saw with this kind of blade (red brand from big box store) and keeping it clamped is a must to reduce noise and to make a clean, safe cut. Ripping it was a little more sketchy. Lots of noise and vibration. Clean cut but not as good as the chop saw. That may also be the bearings on a 20yld portable table saw. Worked fine, never bucked if I didn't keep the part square to the guard. Makes a huge mess which is typical. Part was cool. Used WD 40 as lube but probably didn't need it. Makes the chips stick to everything. Only needed to make 8 cuts so can't attest to longevity. My truck bed slide is almost done so I doubt I'll ever use it again to find out how long it lasts. Worth it for the few times I'll need it. Now for the welding. FYI, tig welding doesn't work well outside in a breeze if you don't have much experience. The arc follows the gas. Gas blows all over. Need a tent to finish this off

I was pleasantly surprised with this saw blade. It fit perfectly on my miter saw. I used it to cut 2020 extruded aluminum to multiple sizes for a build project I'm doing. Every single cut was very smooth and burr free. It cut through the aluminum with ease, no problem at all. I probably made between 50 and 60 cuts in the first three hours of having it on the saw. I highly recommend this blade, it proved itself right off the bat.

Purchased this 12 inch saw blade to mount on Dewalt 12 inch chop saw. Need to shorten a by pass door track fit in a doorway. Made sure the teeth of the blade were mounted in the correct orientation. Also made sure that the track was secured to the chop saw table while cutting.....very important. Started the saw and slowly cut through the aluminum extrusion. No problem. Cut was smooth and I was very pleased with result. Will need to cut through several other tracks in the near future. I don't plan on using this blade in a production unit, or for an extended period of time, but for the tasks that I needed to get done, this blade did what I need for it to do. Well worth the money.

This saw blade performed flawlessly for the aluminum deck railing system I installed. Cut smoothly with no burrs to remove. No unusual sound mentioned in some other reviews. A great deal.

Great blade. Used for extruded aluminum. Nice clean cuts, looks like it will last a long time as I've made a ton of cuts with no degradation of sharpness.

Did a great job on aluminum panels! Very clean cut!

I have a Makita saw that was made for cutting metal. This blade worked perfectly for me in cutting the aluminum bars I use for making my product. Very little burring, nice smooth finish. I could not ask for more.

I used this to cut and install aluminum railings, made in the USA, approximately 1/8 inch thick, and thicker than Chinese junk, and it worked well for the 50 cuts I did. For smaller jobs probably a great choice. I certainly worked for me.

I waited a few months to make this review just to be sure. In the meantime, I did cut extruded aluminium moldings with this blade and it made a perfect job. Of course you need to secure the material on the tablesaw because it's not like cutting wood and I don't have professional or industrial tools. So I fabricated a guide with mdf to slide the extrusion perfectly flat on the table. It's essential that your material does not bob or jiggle in any way in order to do a perfect cut. Also it can be very dangerous otherwise. And be prepared for A LOT of "aluminum filings" that fly everywhere.

I hadn't realized how dull my old blade was until I put this one on. Silky smooth cuts on shedule 40 aluminum pipe.

Used to cut aluminum railings and it cut easily and very clean cuts. Would definitely recommend this product.

I used this to cut aluminum baseboard approximately 1/8" thick. The blade was definitely up to the job even on angle cuts. There was absolutely no tearing or catching. It was like cutting through butter.