šļø Elevate Your Ride with Style and Precision!
The CNC Aluminum Ī¦ 37MM Clip-ons Handlebar replacement is designed specifically for Kawasaki Ninja models, offering a perfect blend of style, adjustability, and stability. Made from high-quality 7075-T6 aluminum and featuring a sleek anodized black finish, these handlebars not only enhance the aesthetics of your bike but also provide a customizable riding experience with a height adjustment range of 25MM or 35MM. Ideal for riders seeking both performance and visual appeal.
| Manufacturer | Fullibars |
| Brand | Fullibars |
| Model | Ninja 250 handlebars Black |
| Package Dimensions | 32.2 x 11.6 x 5.8 cm; 945 Grams |
| Manufacturer reference | HB-NJ250B |
| Exterior | Aluminum |
| Manufacturer Part Number | HB-NJ250B |
| Item Weight | 945 g |
J**.
Use. Locktight. On every screw!
These were perfect, they looked amazing on my ninja 400, install was super easy, then the ends fell off after one ride with them, definitely suggest locktight even though it makes any future encounters with needing to adjust it painful, low key wish I could just buy the end pieces cause I still love the look of them but I can't.
R**S
awesome
these are great! really look good and the manufscturing is rad. really good product thanx
ć**ć°
åēØ®ę¦ćåćććčŖåć§ć§ććäŗŗåć
å·¦ć¹ć¤ćććććÆć¹ć®åŗå®ē©“ć®ä½ē½®ćč„å¹²äø央å“ć«ćŗć¬ć¦ććććććÆć¹ć«ēćććØć°ćŖććć5ććŖč¶³ććŖććŖćäøć«ććÆć©ććć»ć³ćµć¼ć®ć«ćć©ć¼ćØå¹²ęøćććē©“ćéćē“ććēŖčµ·ćé£ć°ćć¦ććŖć¼ć«ćć¦ććåŗå®ćē“ćēå å·„ćåæ č¦ććć¼ćØć³ćć®ććøćÆå¾ć®ē“°ćē©ļ¼m6ććŖļ¼ćä½æććć¦ćććē“ę£ćÆä»ććŖćć儽ćæć®ćć¼ćØć³ććć¤ćććå “åćÆå å·„ćåæ č¦ććć¼ćć«ć©ć¼ćÆē·ć®ćæćć¤ćć·ć£ć«ć¢ćøć£ć¹ćæć¼ćÆćć³ćć«ćć¼ć«å¹²ęøćć¦ć¹ćÆćŖć„ć¼ćåććŖćć®ć§é£¾ćć«ććć¤ćććŖććč„å¹²ć®ćć©ć¼ćÆćŖć¤ć«ę¼ćććć£ćććē“ę£ć«ćć©ćććććć«ćć¼ćä»ćććčä¹ ę§ćÆä»ćć¦ćæćć°ćććŖć®ć§ććććŖćććééććććć£ćććć¦ććå°č±”ćęÆåćē“ę£ćØćć¾ćå¤ćććŖćććŖļ¼ććć ćć®ćć¼ććć»ććć«ćŖć£ć¦ćć¦ććć³ć¹ć±ć®åé”ć§ććććØćčććć°ćå¾ćŖć®ć§ćÆļ¼
T**I
Good Quality Finish
Couple niggly points. The mount does not sit flat on the top of the triple clamp, as the triple clamp is not flat. Only out by a millimeter.The mounting bolts hold it in position well. The bars themselves are not quite the same diameter as the stock bars, so the switch blocks on both sides as well as the clutch mount needs a wrap of insulation tape to enable them to be done up tight.The new position of the bars does put you in a bit of a lean forward pose, but I find it comfortable.Over all, very happy.
M**A
Nice but be ready to modify!
This has been mentioned before. The bars are great looking and mount to the ninja 250 really easily. The problems start when you are putting on your controls and levers. The bars are thinner than the stock ones. You will need to add shims, tape, or whatever to get everything tight so they don't move. Nothing is worse than pushing a button and having the whole control box slide out of place. The only control that tightened up without any spacer was the brake lever. Everything else didn't even come close to it. I used a single layer of an aluminum can for the clutch lever and 3 layers of bicycle tire for each of the control boxes. Even with drilling the holes for the peg on the control boxes left them to jiggle around. A little bit of a pain in the butt.
Trustpilot
1 month ago
3 weeks ago
