2-Pack Head Up Display for Car HUD Reflective Windshield Film,Protective Screen(5.9X5.1Inch) (2)

This product is used on the vehicle's windshield to reflect your add-on Heads Up Display so that it can be clearly seen and read by the driver. It should be placed so that it does not obstruct your view of the road. Lower left corner section of the windshield works well. It can be seen from outside of the vehicle. If you don't want to see it buy a vehicle that comes with a HUD already installed. It is not intended to be used as a shield on you cell phone! It is a Film for your HUD!! It goes on with no problems to a CLEAN windshield. I had no air bubbles when I installed it. I did not have a problem lining it up as it is large and does not require exact placement. After you apply it you can always take a razor blade and trim it a size that suits you. I am more than satisfied with it. It does rate a 5 Star rating!

I had bought a HUD off of a different application and the reflective fild it came with was small and, to say the least, cheap. I purchased this as an alternative and couldn't be happier. The display area is nearly 2 times larger and it is more clear than the others. You won't be disappointed.

bueno

I was hoping for a crystal clear film that you couldn't really tell where the edges were. This is clearly visible and the customer I installed it on wasn't satisfied, so I ended up removing it. It would probably work for most people's cars but this was an expensive Land Rover, so harder to please the owner. Some windshields are very expensive with the HUD film in the glass, but this is one way to use standard glass and still see your reflection of speed and what not.

Larger screen film then what came with the hud unit, so when i change seating heights i can still clearly see the hud. I found this easy to apply. Find the ideal place and Just Clean the glass first with alcohol/water mix. Placed lower edge first and then pressed outwards to remove any air bubbles. Take your time doing that part . *first picture the film looks very dark tinted but that was due to the camera aperature adjusting to ambient light. Second picture is more accurate.

Not saying that I needed them but there were no instructions included. If someone hasn't done something like this before I can imagine them not understanding how to put the stickers in place. My actual issue though was how extremely visible the sticker is on the windshield. It's almost obstructive infact. The concept is there but it's just too much for it to be safe and look good. When placed on the vehicle and seen from outside the vehicle it looks so bad it made me uncomfortable to even look at. Save your money here unless you don't really care about how it looks.

Works exactly as advertised. It looks like a piece of tint film without anything reflecting on it, but reflects my HUd from my phone crisply. Better than just using your windshield. Would buy again. You can cut it to the shape/size you want, so that’s good.

Very large film

These are relatively easy to install and work well.

Didn't like the mirrored outside as seen from the front of the car. It looks obtrusive even though it isn't. Alos cost was great but to return it I'd get .83 c LOL

As described removes the double image and reflects perfectly

It comes with a black tag on one side and a red tag on the other which is used for peeling off . Whatever the reason for this is a complete mystery as either side sticks to the glass whichever way round you put it. The digits are clear and crisp even in bright sunlight and the film is barely noticeable. However viewing it from the outside when parked up is a totally different story and is quite an eyesore, as it looks like a glass mirror! but not a deal breaker. I would definitely recommend this product.

Works perfectly!