JETech Screen Protector for iPad Air 3 (10.5 Inch 2019 Model) and iPad Pro 10.5 (2017 Model), Tempered Glass Film, 1-Pack

The product feels like it is sturdy and would withstand knocks well. It was pretty simple to install but I have installed one before. If I just went on the instructions provided I may have been a little confused. All the items you need to install it are supplied - screen cleaner wipes etc.

Very good !!!

I don’t often write reviews and even then, when I do, it’s often to provide negative feedback - which is a shame. So on this occasion I thought I’d share a positive one!I purchased this JetTech Glass Protector for my new iPad Pro 10.5; initially hoping to buy the double pack which is on Amazon for just £1 more. Alas, there were no 2-packs in stock and I would’ve had to wait. Being impatient to use my tablet I figured I’d risk the single pack. The double pack is obviously the better value and would’ve afforded a “second chance” had I screwed up applying the first one or further down the line damaged this one - anyway that was not to be!So after ordering the single it arrived promptly on the Thursday and I set about fitting it on Friday morning. First thing of note is the screen protector comes in a solid box the size of an A4 sheet of paper but about 1.5cm thick. It’s pretty sturdy too - which it needs to be as most couriers usually force such things through your letterbox. Not the case this time though as my courier, with his telepathic powers, figured this was a low value item and stuck it by the back door :)Inside the box you get a couple of stickers or tabs to apply on the protector to aid positioning on the tablet, a larger fluff and dust removal sticker, a wet wipe, polishing cloth, screen protector and instructions. The instructions are mostly a simple set of illustrations but they’re easy enough to follow.Now digressing a little I chose JetTech over other brands not specifically because of price but that of reliability. I’ve used their glass protectors before and the result afterwards was an almost perfect fitment with perhaps one or two dust particles that snuck in at the last minute - swines! We also use this brand at work for company ipads and iphones and again results are usually pretty bang on. I recently purchased a JetTech protector for my S7 Edge phone but this was the plastic film and it went horribly wrong - so I can’t unfortunately recommend those.Anyway so I cleaned the iPad screen up first using my own cloth before then using the provided wipes. Screen now spotless (for a matter of seconds anyway) I got out the screen protector and applied the positioning stickers. Started to peel the backing off the screen protector and then noticed a gathering of dust particles on the screen already. Sadly I don’t have a dust free room so I got out the dust removal sticker and picked up any new particles before quickly attaching the protector to the top of the screen with the tape then peeling the backing off.I started ok but noticed I was ever so slightly on the wonk. So I carefully lifted the protector back up, repositioned and continued to push back down and tape the bottom right corner to the tablet. So far so good! No obvious particles and the bubbles were easily rubbed out at the bottom of the screen. Only issue was what looked to be a smudge by the fingerprint sensor area that just wouldn’t rub off. Figured I’d somehow touched it on the inside with my finger so I’d expected to live with it. Turns out I don’t have to live with it as I noticed this morning that it’s completely gone. So I have what appears to be my first ever perfect fit first time with zero issues!I haven’t got the case yet so I can’t comment on use of the magnetic cover sleep / wake function which I see some folks have complained doesn’t work with other protectors but this being my own 3rd time using the JetTech glass with such cases I’m not expecting a problem. I can confirm it’s great to type on. Better than typing on the screen without a protector as there’s less impact and if anything a slight bounce with your finger when typing - this whole review has been written on it!I’d definitely purchase another - just wish I’d got the two pack though as I’m a clumsy so and so at the best of times :)*Update*My case arrived yesterday and I’ve been using it for about a day now with no issues. The magnetic lock function works fine with this screen protector. Definitely deserves the 5 stars!

Great product with easy instructions on the installation.

Nice product and it does the job.

Screen Protectors are pretty much essential for today's expensive phones and tablets. I'd previously used JETech's phone covers and was impressed, so decided to buy a couple of these iPad Pro Screen protectors for myself and my daughter.First things first; Screen protectors in general all have one flaw: They go one once and are designed to stay on. If you get any dust under them while installing or fail to wipe the iPad screen properly before use you WILL get air bubbles. Some of these will go over a few days and others won't, but the idea is to find a room where the air is still and dust is at a minimum and, most importantly, prepare everything first then take your time!This kit comes with the protector, a good quality cleaning cloth (which I'm using now for the iPad as a general cleaner), a sticky dust remover, instruction sheet and two tabs that can be stuck either side of the protector before placing it on to help grip it.You need to wipe the screen properly before use and remove all dust, then ensure dust stays off while sticking this on. Then place the tabs either side of the protector on the other side to the removable film. Using the tabs or fingers carefully on each side of the protector, peel the film off (best with two people) while the protector is very near the iPad to remove chances of dust getting on before you place it down. Then place it, hovering, over the iPad to get just the right position over the camera lens hole and around the home button, these are the two points you need to line it up with. Once down, smooth from the middle outwards to remove air bubbles. It's most likely that you may get one or two small bubbles around the edges but these will go when you gently push them to the edge with your finger.I've now installed 2 of these on the iPad Pro and one of them got a little dust and the other didn't., it's just luck and good timing most of the time! Even the one with dust still looks fine. though.In use, the screen protector feels tough and hasn't yet had a scratch despite being used for many hours. The screen sensitivity is not dimmed in any way and feels just like it did without the protector on.

This is a glass screen protector.Pros. Once you get it on properly it is very good. This is the 3rd one now and it definitely protects the screen from scratches and breaks. I have managed to scratch and break previous protectors but the screen itself has always been fine underneath. The previous ones lasted about 6 months each so pretty tough in my opinion. Cons. Fitting is fiddly and you will know this if you have ever done it. You need to take your time and read the instructions. Getting dust trapped underneath really spoils the finish so pay attention to the cleaning. However, patience is worth it and once you have applied properly you will not notice it at all.I will continue to use these in the future and, despite being a pain to fit, I think they are well worth the money and time.

Bought it after I had already cracked my screen once, to protect it from fracturing further (which this has done well). I've subsequently dropped it several times since and the protector has done a great job of absorbing the impact and limiting any further damage to the protective glass only.