Neilsen CT1785 Pole Terminal and Wiper Arm Puller - Black

If like me, your wiper arm has never been removed in 13 years then you're going to have an awful time removing it without this tool. Once you have removed the wiper arm nuts, you will need to attach this device, being careful to ensure the arms are tucked nearly under the wiper. As you twist the device, be careful to ensure it doesn't creep up and stick into the wiper arm as it tightens or it could do some cosmetic damage. This device can be tricky to turn as it tightens up but eventually your wiper will pop off, albeit with an unnerving bang but this is normal. Thoroughly recommend this product. Not sure on longevity/durability, as its not a job I wish to do often but it feels well made and was put under a fair bit of pressure doing its job. Do get one if you need to do this job!

Did the job on a seized on wiper arm. Definitely recommend.

Had a stuck linkage on drivers wiper on E60 BMW. Wiper had come off when bearings failed due to age and rust. Remaining linkage was pretty well seized on. Like other reviews I applied loads of WD40 before using and made sure pullers were fully under wiper arm. Tightened then applied more WD40 and left 5 mins. A few more turns and stuck linkage popped off. Was doubtful of tools capability but it did the job. If used correctly and take time using WD40 this tool is pretty useful.

If you've never taken wiper arms off a car - good luck! Even the Hulk on an angry day would struggle! This is the tool you need to in order to do the job. Well manufactured, good value and superfast delivery. Loses 1 star for 'easy to use' because the turning force required on the pin to turn the screw means the such a narrow pin becomes very difficult to handle ... you could do with something that would let you seat a long spanner over it so you could get more turning force with less effort. All in all, happy to round this up to 5 stars!

Handy

The puller may work well on battery terminals but as a wiper puller on the clamp needs to be more sturdy after spraying with WD 40 the wiper blade assembly a number of times it was still struggling to remove the assembly the arm is too short and needs to be thicker and longer to be effective I ended using grips in order for it to be removed the clamp mechanism worked fine and did remove the arms .so it did do the job but struggled .

I had watched youtube videos on how to release windscreen arms (without a puller) as I needed to access my motorhome scuttle tray, but the arms were not budging and at a risk of damaging them I ordered one of these. A simple tool to operate and after a several tuns of the threaded bolt the arms disengaged from the splined shaft with a popping sound - perfectly removed - without any damage! So easy to use, I could not have managed without it (other than causing damage to the arms or surrounding plastic scuttle tray).

Couldn't budge the corroded wiper arm on my mk7 Golf. The tip of the tool just bent and eventually broke off.

Klein und absolut praktisch. Preisleistungsverhältnis super. Funktioniert einwandfrei. Kann ich nur empfehlen. Sowas sollte jeder Hobbyschrauber in seiner Werkstatt haben😉

Fonctionne parfaitement (Citroën C4 première génération). J'avais des craintes par rapport à la solidité au vu de certains commentaire. Craintes dissipées à l'utilisation, ça fonctionne très bien. Le truc, c'est qu'il ne faut pas forcer. Il faut serrer, pas trop fort, et ensuite faire bouger le bras d'essuie-glace à la main pour décoincer. On sent bien (bruit) le moment où le bras se désolidarise. Recommencer 1 ou 2 fois (serrer, puis faire bouger le bras).

While it did successfully remove my rear windscreen wiper mount (that had corroded and fused to the support), I'm not sure it will survive a second use. It feels cheap and flimsy and has movement in the screw that implies it's ready to snap if stressed, which in itself is disappointing for a tool that's only purpose it to be put under stress. Time will tell...

Finalmente uno strumento che mi ha permesso di togliere i tergicristalli dal vetro senza spaccare il vetro (prendendoci contro per sbaglio) .....ottimo prodotto ha veramente risolta il mio problema.

Lo he pedido para extraer los limpiaparabrisas delanteros del XSARA PICASSO 2003 sin tener que hacer inventos raros no romper nada, para poder demontar la rejilla que se encuentra debajo de los limpias y pider asì acceder a los huecos laterales donde se acumulan todas las dichosas hojas y demas porqueria. Sin desmontar los limpias es imposible acceder y poder limpiarlo, no se quien diseño eso de esta manera pero vaya desastre wue se estè ensuciando cada dos por tres. LO QUE MAS ME HA GUSTADO: la rapidez de la entrega, la rigidez de la pieza, las posibilidades de ajuste en anchura y el conjunto en si parece una herramienta bastante buena en relacion Calidad-precio. LO QUE NO ME HA GUSTADO: El sistema para ajustar la anchura se basa en una tuerca muy gruesa en el centro, excesivamente gruesa, que puede ser algo molesta hasta que consigues ajustarlo bien para que quede totalmente centrado para extraerlo, pero aun así, es un pequeño - en comparacion con la utilidad de la pieza. EN GENERAL: Merecece la pena, si quieres extraer los limpias sin jugartela de no mellar nada o romper algo, y es una herramienta que yo la recomiendo.