Non Programmable Thermostat for Home 1 Heat/ 1 Cool Single-Stage System, with Room Temperature Monitor (LCD White Backlit Screen)

Works great easy install

Great thermostat!! It is precise on temperature readings. Goes on when set. Large glue so easy to read. Buttons are easy to maneuver and set. Only one temperature reading to set.

These are easy to install. Simple and I love that they don't have to be programmed! Easy to read the large number display.

Works well, and easy to read .eyes aren't what they used to be

Easy installation, good price better than the Honeywell i had bought before, glad i came across this one on amazon!

I removed the old thermostat And installed the new one in about 5 minutes. I'm not Exaggerating. If you've never done this before don't worry. It's very easy the wires are all color coded. And thermostat is labeled Don't pay someone to do this ! It's a basic thermostat no bells and whistles just what I wanted..and it does what I needed. The only thing to remember is that the brain part of the thermostat has small prongs that plug into the base and you can bend them if your careless or heavy handed. Be careful when separating or plugging the two parts together .it arrives plugged in And you have to separate before install

Thermostat worked for approximately 3 weeks, then stopped. It started running the furnace fan constantly, no matter if the switch on the thermostat was set to "on" or "auto". I've always had the unit set to "auto". Update 1/16/26 Turns out that it wasn't the fault of the thermostat, but a failed limit switch. I ordered a couple new switches from AMZ, replaced the failed limit switch and an older limit switch before that one could potentially leave me without heat during the winter. Everything is working fine now and most importantly, my wife is warm.

Simple, easy and to the point. We needed to replace the existing thermostat but wanted something simple without all bells and whistles. Found this had a humidity sensor as well for same amount as the another brand without this option that I was comparing it to and thought that was a plus. Install was easy. It came with stickers for labeling the line. We only had 2 lines to mark and connect. Attached the base plate, added 2 AAA batteries and it was done. The digits are big and clear which is nice. We also have a humidity and temperature reader which I placed next to it to see if it matched. It took about 30 mins to acclimate and it read the same both in temperature and humidity. Very happy so far. 😊 Programming can be too much, so this non-programmable thermostat is worth it.

Replacing garbage Honeywell RTH which was a complete garbage. Simple, big display, will just hold the temperature you setup.