GO Inkjet Black Printer Ink Cartridge Refill Kit for refilling Brother, Canon, Dell, HP, Lexmark Printer Cartridges

This save my life the print quality ok I bought the brother genuine cartridges they emptied them selves with in half hour I had to quickly by the black refills to get some work doneI looking for the colour refills now their nearly out too .

So much cheaper than buying cartridges - and simple to do (if a little messy)

I put off doing this for 6 months because I hate doing fiddly things but it was much easier than I expected. The hardest part is making a hole in the top but it just takes a little time and probably more pressure than I was using initially. The instructions are rubbish but the first tutorial I found on youtube helped me perfectly. My printer is a Cannon pixma and it worked perfectly straight away I didn't bother with resetting anything.

Very good alternative

This item consists of 4 bottle of ink, a syringe, a needle optimised for the task, a small bag of tools, just about useless and an instruction leaflet which is totally useless.I used them to refill 2 HP 337 cartridges.One I probably overfilled the other is OK. Neither of them worked initially, but I managed to have them working again by learning how to clean the clogged printhead from videos available on the web. I left some tips in the annex.What I did was simply1) Refilling the cartridges (using the first or all three does not seem to matter)2) Leave the printhead (only that) for a few minutes in some 2-3mm of hot water (better if distilled water and some 20-30 min at least)3) Dried cartridge all over, dried the printhead by leaving it over a kitchen paper towel until some ink is absorbed. Despite this not being too recommended I also gently wiped the printing head with it.4) cleaned the electrical contacts with alcool5) Tested on the printer again.One printed returned to print perfectly. The other one is not perfect but good enough.Not surprisingly the first left a full strip of ink on the paper towel, whilst the second still had some part missing in the centerA clever tool, which is unfortunately specific for each cartridge, that I have seen being used as well is a simple cover to be applied over the nozzles and with a hole for the syringe on the other side. One can then use it to create some vacuum with the syringe. This sucks out the dried ink out of the nozzles.The kit instructionsNone of this is learned by the leaflet. This covers instead several cartridges with poor drawings and basically says for them all: "remove the label, find the filling hole and fill the cartridge with ink" It doesn't say where filling holes are, (the HP 337 has three), how much ink is needed and most importantly it does not help to unclog the printing heads, which is the most likely reason failure.ANNEX: Printing cost gets really trivial.What I learned is that1) It is better to refill the cartridge before it is completely empty.2) The needle must be inserted half way through the internal sponge.3) To be on the safe side one can use 5 ml of ink but 10 ml is fine for the 337. Else it can fill totally the cartridge till the ink overflows and then suck back some 3 ml of ink in the syringe.4) Eventually replace the printing head (but still try cleaning it first)For black ink the quality is absolutely fine and this makers printing really cheap.

No problems filling cartridge .left for 12 hours for ink to settle. Printed first time without any issues. Very cost effective. And good for environment

So I'm sure this ink s great for its intended use in inkjet printers though I didn't get that far yet. The reason for the 1 star is that 2 of the 4 small bottles of ink has lose caps. The ink spilled into the blister pack which unfortunately isn't sealed so the ink leaked out. By pure luck I had placed the blister pack on a stack of papers which absorbed the leakage but everything inside the pack was covered. I've managed to salvage some of the contents so I think I can use the ink but my fingers are black. Just very fortunate my desk, rug, mac etc are still their intended colour. Not sure now long it will take to get the ink off my fingers......

Couldn't believe it when my cartridges dried up after less than 3 months. Am delighted with this product! Yes it's messy the first time you do it because you have to make the holes, etc., but after that it's easy and I will save €100's over the next few years just using this product instead of wasting money on ink.I used on a Canon Pixma 499 - it's not listed on the product list but it works perfectly! I looked youtube to get a feel for where to drill the holes and how to do it. I would recommend to anyone that wants to throw on a pair of gloves and save money!

Article de très bonne qualité, je recommande !

Also ohne Witz, absolute top Qualität. Uralte Patrone wie beschrieben befüllt und sehr gute Ausdrucke erzielt.Preis Leistung sehr gut.

Tenemos una impresora multifunción HP y los cartuchos nuevos nos parecían demasiado caros para el uso casero que le damos a la impresora. Por el precio hemos decidido probar suerte con este kit rellenador y la verdad es que ha sido muy fácil de utilizar y los resultados son satisfactorios. Hemos rellenado el cartucho completo de tinta negra 337 con algo más de medio bote, así que la cantidad da para rellenar el cartucho varias veces. Lo que sí mancha bastante: recomiendo cubrir con plástico la superficie donde vayamos a realizar el trabajo (el papel lo traspasa fácilmente) y utilizar guantes (unos finos de nitrilo por ejemplo serían suficientes) para evitar manchas.

E' un kit efficiente e sempliceci sono 3 boccette di inchiostro piccoline ,una siringa ad hoc per le cartucce ,una vite per aprire il foro della cartucciatappi per il foro della cartuccia , istruzioni d'uso un guantino usa e getta e credo basta.Ho provato a ricaricare la mia cartuccia con notevoli risultati ,certo nn sarà il colore originale ma per uso domestico va piu che bene ( ci faccio fotocopie per lo piu di documenti , niente che necessiti particolare qualità grafica)ps : la mia stampante è una vecchia lexmark x2470

La presentación.Rellenar cartuchos usados.