CatEye Centre Fork Light Bracket 534-2440 Cycling Lights and Reflectors - Black

It means fewer things on the handlebars and the front light is a little closer to the road which is possibly useful on unlit country roads. You need your own bolt to go through the front fork crown. May create issue with old style side and centre pull brakes with length of the brake bolt and some bikes which don’t have hole in fork crown. I’m happy but it’s often the little things in life that can bring most joy.

Functions exactly as expected. Enables me to ride with bar bag and still have unobstructed light for visibility.

A bit "clunky" but it holds a Cateye front light secure and pointed in the direction you need. It also saves on handlebar space, which is at a premium. as it fits on the fork crown or fork brace.Seems well made and is easy to fit... just check before you buy that the chosen location has a threaded hole (fit a bolt to check as some forks have odd threads that are difficult to match) or a through hole to fit an appropriate bolt into. I've fitted this to a suspension fork that has a threaded hole on the brace on my wifes KTM, then looked at my KTM and it had no corresponding hole, so I need a different solution!I didn't check before I bought it and the thread was odd but I managed to cut a thread that worked.

I bought this bracket at the same time as the Cateye AMPP 500 for my Brompton.I wanted better visibility when cycling through dark/poorly lit parks and I needed better visibility on the roads to accompany my smaller flashing light which is mounted higher on my handlebars.This bracket does fit the Brompton on the lower brake bracket but it needs a bit of fettling to make it work if you carry a front bag as the light hits the block affecting steering.It's fairly simple, just disassemble the plastic light clip from the metal bracket and turn it through 180deg and mount it the opposite way round to how it's supplied. This will allow you to feed the bracket under the brake callipers so the light is mounted lower and no longer hits the block or the bag. g. (You may need to fit the plastic light bracket after you've fitted the metal part to the bike to make it easier to feed under the brake calliper)If you don't use a front bag and carrier block then I imagine this won't be an issue, so just mount it above the calliper as normal. I hope this review helps anyone with a Brompton. 👍🏻

I bought this bracket to mount a cat eye AMPP500 on the front of my wife’s bike. I needed this bracket because if the light is mounted on the handlebars the fitted basket casts a big shadow in front of the bike. The bracket turned out to be the perfect solution. It’s very sturdy and can be fitted onto the central mud guard mount (with a slightly longer bolt). It gives just enough clearance for the v brake to work without any contact with the bracket.

I've been using this with the Cateye Volt 1700 permenantly mounted for three years until the metal bracket sheared off and dropped my light on the pavement without warning. I probably covered about 4000 miles in this time.The good:A really rock solid mount for the light that does not slip like handlebar mounts, if mounted correctly - which leads me to the extras...The extras:To secure a good mount, you'll need to buy some 1" rubber washers and metal washers as well as a bolt and some threadlock. I had to replace the rubber washers every year as they perished and shrank compromising the stability of the mount. I had to take a dremel to shape the large metal washers over my front mudguard, but this will vary with your bike's clearances.Next time:I will buy another one of these, but I won't leave the light permenantly mounted onto it as I think the weight significantly contributed to this failure. I'll probably have to replace it every 5 years of so as well as I don't want to risk wrecking a £150 light for the sake of renewing a £7 bracket.

Superb bracket, very sturdy. Weighs 45g (Plus the bolt through the bike) so a little heavy but is very substantial.The regular flex right bracket is around 18g so not that much more, but this is very very secure.You will need to buy fixing to hold to the bike, but still an absolute bargain.

These are good for mounting lights from the centre of the fork. Good solid consyruction.

It is perfect!

Lo he instalado en una brompton tras cambiar la posición del soporte y ubicándolo entre las tenazas/cangrejo de los frenos y el guardabarros... miren las fotos..

流石純正部品、バッチリハマります。ブレーキの形状によっては干渉するかも知れませんが、合うように加工すれば無問題です。自分はリムブレーキのアームとのクリアランスを稼ぐ為、少し曲げ加工しました。贅沢を言えば車体側はワッシャー状というかカラーのような形状だと尚良いと思いますが、価格を考えると良い製品だと思います。

Very good.

Ho acquistato questo prodotto per fissare la luce Cateye alla forcella di modo da aver più spazio sul manubrio della mia gravel e sono super soddisfatto dell'acquisto!L'acciaio sembra di ottima fattura e la luce è super stabile, anche nei tratti molto sconnessi con ciottoli; il che, per chi usa la bici tutti i giorni anche per andare in ufficio, è un plus molto importante.Il supporto attualmente viene fornito con vite di fissaggio e rondella in ferro da posizionare tra il supporto stesso e la vite. Sinceramente, io ho aggiunto anche una rondella in plastica onde di evitare di rovinare la vernice laddove il supporto sarebbe andato a serrare sulla forcella.Nel complesso comunque un ottimo prodotto, consiglio