Spigen Liquid Air Case for iPhone SE / 8/7 - Matte Black | Anti-Slip Textured Grip, Qi Wireless Charge Ready, Patented Air Cushion, MIL-STD-810H Military-Grade Drop Protection

I've been using this iPhone 7 case for over three months now, and I must say that I could not commend it enough. It's slim, doesn't interfere with any screen protectors you might want to use and feels great in the hand.One of the things I noticed from watching reviews on YouTube of the iPhone 7 was that it was incredibly slippery in the hand. I partly purchased this case with that in mind, as I thought the material looked like it might add grip to the phone. I was right. I've become so used to how much grip this case gives you that I almost feel nervous holding my phone without this case.The design on the back is nice and modern, and the low profile Spigen logo looks great. The cutouts for the camera, speakers, charging port and mute switch are perfect, no bad quality rubber around the edges like you'd see on cheaper cases.The volume and power buttons feel great with the case on, which can't be said for most cases. They're tactile and clicky still which I really like.If you're looking for a slim iPhone case that will give you protection, style and ease of use for a low price (or even any price!), this is absolutely the case for you.

Well made, high quality black polyurethane with textured finish that is not overly chunky and does not detract from the slim lines of your phone handset.This is a nice a lightweight case from Spigen that offers good protection to the rear, edges and to some degree the front glass surfaces of a modern phone handset.The rear of the case is textured black PU, giving the case a good grip on your hand to help prevent the phone sliding out of your grip. Buttons are raised at the sides and the thin design of the case means even the Silence rocker isn't too fiddly to switch on or off, even if you dont have long nails, the charger port is similarly not obscured or covered meaning there should be no issues using original or 3rd party cables.The front edge of the case is raised a few mm around the glass of the scree - not a huge amount that you would notice it, but enoug that even if the phone is resting face-down o nte surface, it should help prevent the screen get cracked or suffer an impact during a drop.As the case is a thin design and not overly chunky, i would not expect this case to protect the device entirely in a long-distance fall. but from bumps and scrapes it should be more than adequate.The case is well made with a high degree of manufacture - there are no blemishes on the finish, and no tailings or casting/molding marks on any of the edges from the manufacture process.

While I try my best to make the most of my ageing iPhone 8, this case by Spigen has given it a fresh lease of life. Its clean pattern on the back provides a premium feel in hand, the case fits snuggly. It gives you access to the lightning port and the ring/silent switch while the volume and power buttons are covered but remain nice and ‘clicky’. It truly is tempered-glass screen protector friendly, with the lip of the case rising just a millimetre or so above it. Only issue I had originally is that when I’d slide a magnet inside the case for my car’s phone mount the screen protector would protrude slightly leaving it exposed- I solved this by finding a thinner, smaller piece of metal which does the job perfectly as I didn’t want to ruin the appearance of this lovely case by sticking the magnet on its surface! I love that the lip is protected unlike in apples own cases at a fraction of the price. So overall, my phone feels very secure in its new home, I’d give 9/10 for now but I’ll update accordingly.

Typical Spigen fashion, which offers excellent quality.Seems to offer very good protection for the thickness, raises the camera so it doesn’t scratch on tables and has a lip around the edges so display doesn’t touch the surface when face down.Personal opinion.The sides are a bit too soft and it feels a bit slippery and although the protection might not be as good but I would of preferred the sides to be a bit thinner.The buttons look excellent and are responsive through the case. No issue there.Cut outs for speakers are excellent too. Perfectly matched.The colour is very nice and the overall design is truly very good. Just the soap style sides which gets me a little.All in all I won’t be replacing it and the case ticks enough boxes for to warrant ignoring the soapy soft edges of the case.

Excellent case. When I first got my iPhone 7 I realised I'd probably drop it pretty quickly as it's way too thin. I looked on Amazon for a case and found this. I'm very specific with what I like, and when this case arrived I instantly loved it. It fits PERFECTLY, all the holes line up and the side buttons are perfectly snug and responsive.The case has a really nice sanded matt semi rigid rubbery texture that I love the feel of. The back has an interesting triangular geometric pattern etched into it which helps grip but is subtle enough that dirt doesn't lodge into the lines. You can tell a product is well made when the unseen parts are well finished too, in this case the inside of the case, which features a nicely cut pattern and detailed logo. I don't know how much protection the case would offer, but probably more than the naked phone would. When I go to work I use a more rugged case so this is my weekend case. It's the sort of product I want 2 of, just because I love it so much.

My last Spigen case for an Iphone SE 2016 is 5+ years old and still going strong. I purchased a Grade 'A' refurbished Iphone SE2020, didn't even consider another brand of case, and this case fits perfectly with cut-outs for cable, camera perfectly aligned and don't hinder a good cable connection like some cheap cases. The SE2020 is a slippery phone and this case gives just the right amount of purchase in the hand to prevent dropping it. It slips into your front jeans pocket and doesn't snag like some rubber cases. It doesn't attract dust.I twinned this with "JETech Full Coverage Screen Protector for iPhone SE 3 (2022)/SE 2 (2020)/8/7 4.7-Inch, Black Edge Tempered Glass Film with Easy Installation Tool, Case-Friendly, HD Clear, 3-Pack (Black)". The protector fits the SE2020 perfectly, if you are meticulous in your preparation, with no bubbles or lifting.Back to the case - perfection as far as I'm concerned. Highly recommended!

Had this case for almost a year now and it has been excellent and of high quality. All the button covers are well aligned and work well and all the holes for the camera and lightning adapter are perfectly positioned. Really like it so far. I know of some negative reviews regarding the matte finish to the actual phone becoming faded after a while. Have to say I was cautious at first but I ended up cutting out a piece of paper and placing it between the back of the phone and the case. This definitely helped as the paper became stained pink after a few months which was strange but thankfully the phone was protected. I was a bit concerned about the original negative reviews but no pictures were provided from other reviewers so I was unsure of how genuine they were. Overall, I would highly recommend - the case looks expensive and better than official Apple ones, plus for the price this is great!

To me it is the best cover I have never had!!It has a really soft touch feeling and doesn't get stuck in your poket,the edges are really accurate and the tickness helps to protect the screen too.I didn't test the corner yet (and I hope I won't do it).The bottons are perfect and the holes in the bottom too.The hole where you swich on silent mode is large enough to move easly the botton by using your finger (no nail required).The ONLY LITTLE PROBLEM I MET was inside the cover.The pattern inside seems slightly imprinted on the backside of my iphone...I tried to wipe it off with a dry cloth but still there...May be I will need to use some wet clothes,but I didn't try yet because it gonna happen again after few months of use,so I just left it so.

La funda tiene una estética, funcionalidad y resistencia de 10, se ajusta perfectamente al iPhone y tiene un espesor delgado y resistente. No se resbala de las manos, buen precio y calidad…

The plasitc rubber material is really soft to the touch but also provides enough grip so your phone will not slide out of your hand.

Best phone case I have ever used. The Spigen cases are super tough, nice and slim, they feel good in the hand and they look good too! I've tried another top name brand, but they make the phone hard to use, and even discoloured after a while. I have spigen on two phones and my iPad. You can't beat a Spigen case.

Very nice and smoth in the hands also very good quality..

Siempre he recurrido a Spigen para proteger mi teléfono. En esta ocasión elegí esta funda para no confundirla por el color con otro iPhone que hay en casa, y no puedo estar más contento pues protege muy bien, y lo más importante, después de bastantes meses de uso, está como el primer día.La funda es de plástico blando, flexible. Protege toda la parte trasera y por la delantera, tiene un grueso suficiente como para que toque antes la funda que la pantalla si colocamos el móvil boca abajo.La parte trasera tiene un dibujo de triangulitos pequeños que facilita el agarre. Tiene buena textura y es muy agradable al tacto.Es en definitiva muy ligera, apenas se nota que la llevas y protege perfectamente el teléfono: las esquinas quedan muy bien protegidas.La parte inferior tiene tres agujeritos (para la toma de carga y los dos altavoces).Colocarla es muy sencillo, se adapta perfectamente al teléfono.El color que he comprado es un azul oscuro/lila oscuro. Con mi iPhone negro queda bastanrte bien y parece color negro.Después de varios meses de uso, el iPhone por la parte trasera está impecable.Vale la pena usar una buena funda para proteger el móvil. En mi opinión este móvil resbala bastante fácil y se puede caer/romper si no llevamos funda.