addiExpress Kingsize Knitting Machine

I deliberated for such a long time as to whether to buy this or not. I read so many reviews over time for this and other makes. I have a friend who bought one of these quite a while ago, so it came highly recommended. However, I still wasn't persuaded enough due to the difference in cost. I almost bought a different one but decided to just go for this in the end. I obviously can't do a comparison, but what I can do is tell you how I'm loving this Addi Express. It is so easy to use. It feels sturdy and comes with optional clamps to temporarily secure it to the table during use. I leave it out secured to one of the tables in my craft room, so can easily use it whenever. What I would say is that not all yarn is equal and will not behave in the same way even if it's the same weight. Take your time, especially 'casting on' and for first couple rows. Make sure there are no missed stitches and then you're good to go. Some yarn just does what it's supposed to do straight away, but others need an eye on them to begin with. One tip I can give you is, if you find that the yarn is bouncing off during cast on, put a clothes peg on the long cast on tail to give it a bit of weight to hold it down gently to help keep it in place. The machine is a work horse and so far, I've tried DK, Aran and Chunky weight. Although pricey compared with others, I think I'm going to work it hard and hopefully it will last a long time. It's definitely helping to get a lot more charity knits out in super quick time.

Well constructed easy to put together out of the box. Went on YouTube to see how to use it and get ideas on how to use it to its full potential. I have tried to use it for flat work and not in the round. It's not too bad I did drop a few stitches at the start and end of the rows and feel that a bit more thought from me and maybe some crochet stitches may be needed to tidy up the end product when making scarves. I find that it tries to curl in on itself if not. I havent tried making any flat pieces yet to join together into a poncho or blankets etc. To be fair I have been to busy experimenting with different wool thicknesses to see how they perform and what they can produce in the round. I have had a great time pushing this machine to its limits in that respect and have produced a great variety of hats and neck warmers. Down side I am left handed and would have liked the option to have the handle on the left hand side so that I can see the row counter at the same time. Instead I have had to conform to the right handed way of life! Wish there was a way of being able to adjust the tension so that I could use a finer wool to make baby hats. I have got the smaller version of this machine and that is too small for that purpose so I have had to learn to use a circular needle to make baby hats. If anyone from Addi are listening could they make a machine that was between the 2 sizes available or 1 that had some sort of adjustment mechanism. Pity they can not make one that is in between the 2 sizes

Easy instructions. Heavy well made but easy to use. Knits fast with care but if you are too fast you can drop stitches. This machine can knit circles and panels so you can make anything. They also sell a pattern book. I prefer to knit panels with this machine as it has stopper ends but I use the pryml knitting machine for circular tubes. I have made hats and scarfs for myself, so far. Hat was made in 15 minutes, scarf 30 mins. I plan to make my grand daughter a sweater. This machine can also reduce stitches for shaping which I have not mastered as yet. i would highly recommend this sturdy robust well made machine for its ease of use and instructions. It makes knitting fun again. It also has clamps to attach to a table top so you old use it with one hand. It uses chunky and double knitting although 4 ply looks more like a net so it depends what you want to make. I also plan to make doll clothes out of the tube and hand finish them by picking up the edges and doing a rib. The possibilities are endless.

I already own a couple of flatbed knitting machines and had thought about getting a circular knitting machine for a while but they had been out of stock from Amazon for ages too. Now the price has come down to a sensible one it was worth getting one. This arrived quickly and safely via Amazon UK and it’s very simple to use. Everything is made of plastic which surprised me, it’s very lightweight. But it does the job well. It comes with 2 metal clamps and spare needles, 2 stoppers in a box for flat panel knitting and a plastic needle for casting off (there’s a hole on the top of the machine for storing this little red needle). I’d recommend taking your time and hold your yarn softly as it knits, there is no tension device just your fingers. It does have an essential row counter mine is mechanical and easy to reset by turning it back to zero. It does clank and you will feel resistance as it goes over the counter mechanism inside as you crank the handle, but this is normal. Watch some YouTube videos to help you get started, it’s a great design though I’ve found some yarns are easier to knit with than others (I’ve found DK yarns seem to knit easily where thicker yarns like chunky could easily drop a stitch, just watch the needles at the front to see it’s got the yarn, if it slips over it that’s when you drop a stitch) dropped stitches can be rescued though, see YouTube videos on this, you’ll need a crochet hook to reknit it back up. I’m still learning with it and I’ve also purchased the smaller Addi 22 to make smaller items like socks, this one is great for hats and scarves made quickly. Changing the yarn colour is easy too. It comes with instructions but no patterns to get you started but look on YouTube for inspiration. For a woman’s lined beanie hat I knitted 140 rows, no shaping needed, knitted in 30 minutes. I made a long tube scarf too in no time from one ball of yarn. Take your time, don’t ever force the crank to turn if the yarn feels too tight or turn the crank backwards in circular mode (there’s a switch on the side) and enjoy.

Great machine once I figured out what I was actually doing. There was definitely a bit of a learning curve even after I watched videos on how to do setup and make some projexts. I started using my Addi two days ago. I watched a YouTube video for the setup and started a hat. My first attempt had a lot of dropped stitches and was pretty terrible. Watched some more tutorials on specific projects and slowed down so I could manually fix all the dropped stitches. At this point, I felt resigned to a couple of dropped stitches a row which was still a heck of a lot faster than hand knitting. Eventually, I had a bit of a Eureka moment and managed to get the tension right for the yarn I was using (between exactly where to slot the yarn and where I placed my guiding hand). After that, I powered through 80 rows with no more dropped stitches. TLDR adjusting tension for the specific yarn seems to fix the dropped stitch issue. UPDATE: Had the machine for a while now and it's holding up well. I think the best thing about this machine is that it made me a way better knitter. For some reason, fixing dropped stitches allowed me to understand how yarn is actually connected in a knit pattern. Have made a lot of hats and infinity scarves. Overall a great machine for larger items. I wouldn't try and plan to use this for anything with patterns or intricate designs.

Bom dia. Para mim está sendo mais difícil manusear a máquina. Assistindo mais vídeos e treinamento, vou conseguir. Precisaria de um livro de receitas em português. Obrigada.

Top top ,la qualité est présente sur tout les composants

Super Ich finde nur das es eine teure Angelegenheit ist.

網目が均一でとても素晴らしかったです！高い買い物ですが目が飛ぶとこもなくさすがだと思いました。 他製品と迷っているのであれば個人的にはこちらがいいと思います。 目がしっかり揃い、飛びにくいので他方より糸の種類を選ばない気がします。ただし、他方より少ししっかり余るので緩めがいい場合には悩むところです！ ご参考になれば幸いです。