amFilm Screen Protector for Samsung Galaxy S23 Ultra 6.8" Tempered Glass

Edit: Changing my review to 1 star. I just found out the glue actually seeped into the pen compartment during installation, something I never even thought to check. It was a complete mess to clean, and I’m not sure how much glue got inside. Thankfully the pen still works, but this could have easily ruined it. Really disappointed and would not recommend this product. The kit looks clear at first with great packaging, but the installation is extremely unforgiving. Every step has to be 100% precise with no room for error. My first attempt left part of the screen damaged while removing the leveling frame before the second UV cure. On the second try, a dust particle slipped under as soon as I placed the screen, ruining the result. Considering the higher import cost and long shipping time, the whole experience was very disappointing.

Fitting is good and all. Sides looks nice with no dust going in. (After 1 month) My only complaint is the fingerprint sensor works 1out of 3-4 times. Yes i added them after installing the protector but still same issue. I follow every sing step as per the utube videos.

IMPORTANT: Inside the kit are two 'foil' wrapped wet cleaning clothes. Not the alcohol ones found in the little packet, but the packets with "Step 1" and "Step 2" labelled on them. DO NOT apply this wipe to your screen before applying the protector! I'm unsure what this wipe is, I'm guessing it's an oleophobic coating that goes on AFTER, but if you start wiping your display first with this wipe, you will end up with streaks all over the device. After I wiped my bare screen with it, I caught it just before I poured the adhesive. Make sure you are using the wipe containing alcohol, not the wipe with the two-step instructions. ------ Every time I buy a phone, I always buy 3-5 different types of screen protectors. This time, however, I only bought this one. I last used an Amfilm UV screen protector with my S21 Plus. There have been some changes that are very important to know before doing anything with this! The application was super straightforward. Take your device, apply the levelling foam pads, and open the cleaning materials and stickers packet. Use 2-3 of the smaller dust stickers to cover your ports! The S-Pen port (Or your pen can get glued in), the volume rocker, and the charge top microphone home. Use the isopropyl cleaning wipe (Please make sure it says it contains isopropyl alcohol) and wipe down the display. Use the microfiber to wipe off dust, apply the fixture, and use your larger dust stickers to remove dust. Apply glue, set the glass down and let it sit for about 2 minutes! Also, make sure the foam absorption pads are fully pressed in and make contact with the sides of the phone. After it's sat for a few moments, place the weight on top of the fingerprint sensor. Put the UV light over, and I let mine sit for about 2 minutes. I removed the weight and applied the uv back to the phone for another minute. And then I was done! TIP TO AVOID EXCESS ADHESIVE MESS: Push your phone out from the fixture by pressing the screen downwards and lifting it on the fixture. Apply the UV light again all around the device's top and sides. The UV glue that leaks around will begin to congeal into a thick piece you can peel off. This is easier to clean up the excess than wiping the phone for an hour. And now you're done! Pros: +Adhesive pushes micro particles of dust OUT +Finger print sensor works perfectly +Protective +Has not peeled on me +Very clear +Easy to install +Lots of adhesive! +Built in levelling meters. Cons: -It's easy to mix up the isopropyl alcohol with the other wet wipe (which I think is oleophobic and leaves streaks) -Little bit of a tedious and intimidating process for people not used to these kinds of protectors -No dedicated stickers to cover ports! The S20 and S21 both had black stickers to block off the ports. -I would prefer the protector cover the front camera, sadly there's a cutout -There are little 'offset' dots around the screen protector, which aren't super noticeable, but they can be -No fullscreen dust sticker like the regular glass protectors have. I would have loved to see full-screen dust stickers such as what the Amfilm iPhone 14 Pro max comes with Most of my cons are to do with things I wish the kit came with or was different. The screen protector is great, the kit is great, and it's the best for the money. I hope Amfilm considers these suggestions going forward!

Ninguno de los protectores funcionó, uno de ellos venía totalmente roto. Lo califico con una Estrella porque no se puede poner ninguna.

Fingerprint sensor: somewhat affected after install. Just re-programmed my fingerprints, not a big deal and worth it. It was actually not affected that much though. My print worked most of the time without reprogramming. But, use the weight provided to help during the install- it probably matters. Ease of Installation: it was tedious and required many steps. But it was smooth and easy. After reading reviews about absolutely needing both kits, I thought it was going to be a nightmare. But, I read the instructions thoroughly. Had everything set up as instructed and in order to make the install sensical. I kept the instructions on hand for reference which was needed periodically. I did not watch the videos, but I am sure they would be helpful. And it was a perfect install the first time with no bubbles and no slippage. Not sure why so many people struggled unless they didn't have or follow the instructions. Performance: phenomenal and worth it. Have dropped my phone and dragged it across rough surfaces since install (obvi accidentally) and NO damage at all to screen or protector for that matter. The protector has not even slipped out of place. Screen sensitivity: still 100%, just like without it.

I purchased the amFilm screen protector for my Samsung Galaxy S23 Ultra expecting a premium product with a reliable installation process. Unfortunately, this was one of the most frustrating screen protector installations I have ever attempted. I carefully followed every step of the instructions, cleaned the screen thoroughly, used the included tools, and took my time. Despite that, the installation still failed. The alignment process was far more difficult than advertised, and the adhesive application did not produce the clean, flawless result that was promised. The biggest issue is that amFilm markets this as a precision installation system, but the actual experience feels extremely inconsistent. With a curved-edge display like the S23 Ultra, there is very little room for error, and this product does not provide enough margin for mistakes. Issues such as imperfect adhesion, visible flaws, and difficulty achieving a completely clean install make this unacceptable for a flagship phone. A screen protector should not feel like a lottery where one attempt might work and another might fail. The whole point of an installation tray and guided system is to remove uncertainty, but this product still left me with a disappointing result after carefully following the instructions. For the price, effort, and reputation of the brand, I expected much better. I cannot recommend this protector for the Galaxy S23 Ultra.

Below is what is lacking, but - I will say that I WOULD buy this again despite all that. Its one of the best screen protectors.... Just several things lacking for installation (big things) --- 1. Did not come with a microfiber cloth - made installation very hard 2. The tray (with installed levels) is not level. (Had to place stuff under it to level... As seen in pics) 3. THERE IS NOT ENOUGH LIQUID ADHESIVE TO ADEQUATELY SPREAD ACROSS THE SCREEN. (Sort of - see below) 4. Bubbles after installation. (See below) First attempt didn't even come close for the adhesive to reach the edge of the screen (maybe still a couple drops in tho). 2nd attempt I made sure to get every last drop out of the liquid adhesive cartridge - this was better BUT STILL NOT ENOUGH - sort of. The 2nd attempt, after like 2 minutes the adhesive managed to crawl to cover the entire screen - but the edges were SLOW to cover - and when it was going slow, it left micro bubbles (that I see after installation). Also that second attempt left 3 non-micro bubbles too... You can see all of this in the above pictures. Overall, the second attempt was OKAY - like it works. Hopefully it will last?? But this is lacking for a more expensive screen protector.