Push-on Slotted Right Angle 90 Degree Grease Coupler

Best low profile right angle grease gun adapter I’ve ever used. Seals tight and doesn’t leak. It’s the lowest profile one I’ve tried and allows me to grease my lower ball joints without having to pull the axle shafts if I line everything up perfectly it just barely sneaks in there. Wish I had found this a decade ago, have tried a handful of these things over the years and none of them worked for this application. Have probably pulled those damn axle shafts a 100 times by now to grease the lowers until I tried this product. If you have a 4x4 you will love this product pulling the front axle shafts once a month to grease the lower ball joints gets old real quick!

This is a must have for hard to get grease fittings works perfectly and no grease leakage it locks in place , a little tough to get off but thats a good thing when pumping in grease . I use it with my locking grease fittings the perfect addition to your grease set up durable easy to install perfectly designed very durable worth every penny

Excellent product for hard-to-reach zerks. Worked the first time I tried it. Highly recommend and thank you to LockNLube for making a unique product like this one. The picture shows the type of hard area I was able to use the coupler for. In my case, the zerk was facing the yoke arm, making it impossible to reach with regular couplers.

Great for greasing tight areas.

It works as advertised. Perfectly. I saw other people reviewing it saying it just went all over the zerk fitting and not inside, and there’s only two reasons that would happen. Either the joint can’t take any grease, or the adapter wasn’t seated properly. You have to press it all the way on until the zerk fitting bottoms out in the groove on the adapter. Do yourself a favor and try this- get yourself a 7/16” deep socket with extender, and a hammer. Place the adapter on the zerk and press it as far on as you can. Next, place the socket & extender on the nipple end and give it a few light taps with the hammer to seat the adapter. It’s a nylon sleeve so it’ll go on eventually. Press your grease gun on the adapter’s nipple and give it a squeeze. You may need a pair of needle nose pliers or vice grips to pull it back off when you’re done because you hat nylon sleeve holds it tight. This all seems like a lot of work, but if you have to undo your suspension just to get at 4 fittings located INSIDE of a bracket on TOP of two lower control arms, you’ll still come out on top.

Works great for hard to reach fittings. Does not leak grease out.

Works fantastic, I bought this for one reason. The grease zerks on the bushings on my rear wheels of my RMax. Anyone that has one knows how much of a pain these are to grease. Usually end up breaking the zerk off if you can get it in there. This, no problem, especially if you have the locknlube end on your grease gun.

Love this little gadget. Works perfectly as described. Sure does save on my knuckles trying to get into tight spots on my mower.

This grease gun attachment allows me to grease the suspension even though the grease nipple has about 10mm of clearance.

Very happy worked perfectly

Ideal for tight access

Leaked, load of rubbish

Just what I needed